Montageanleitung
Hot 
The high-quality 38 mm original cylinder is now also available exclusively with «Vertex» pistons.
This cylinder fits various Puch mopeds / mopeds such as Maxi S / N, Puch X30 NS / NL, Puch X30 NG-2A.
Vertex pistons are world-renowned for their quality and design.
With this cylinder, you will reach your destination quickly and powerfully.
- The intake window has been moved downwards to achieve better timing.
- Lubrication holes on the piston to the piston pin.
- The inner flats on the piston have been milled flat for clean guidance of the connecting rod bearing
- The piston skirt has been optimized
- The inlet angles of the connecting rods have been adjusted
- ;The intake and exhaust have been machined to be largely flat (exhaust and intake manifold can be fitted without any problems)
With these optimizations, the 38 mm cylinder kit delivers a whopping 1.6 hp on the rear tire. This makes it the most powerful 38 mm cylinder with seal for Puch ever!
The original «CH12» is of course also cast in.
Attention: This cylinder is a reproduction product which is not approved for use on public roads.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Nominal diameter | 38 mm |
| Manufacturer | swiing® revival parts |
| Material | Aluminum |
| Displacement | 50 ccm |
| Surface | sandblasted |
| Crankshaft stroke | 43 mm |
| Ø cylinder neck | 48 mm |
| Ø outlet inside | 20 mm |
| Ø Inlet inside | 9 mm |
| Inlet window | 2 |
| Area of application | Standard |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 38 mm |
| Ø piston pin (B) | 12 mm |
| Number of fixing points | 4 pcs |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Decompressor | Yes |
| Camouflaged | Yes |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Area of application: Standard
EUR 37.00
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 4 pcs · Ø cylinder: 38 mm · Hole spacing inlet: 32 - 38 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 8.35
swiing® revival piston 38 mm Vertex | Puch
Manufacturer: Vertex · Manufacturer: swiing® revival parts · Nominal diameter: 38 mm · Ø outside piston (A): 37.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.45 mm · Curvature (D): 3.5 mm · Total piston height (E): 50.45 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.5 mm · Thick piston ring: 1.6 mm · Tolerance group: A · Piston weight: 71 g
EUR 67.40
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Bearing cage: Silver cage · Dimension needle bearing: 12/15 x 14.2 · Ø inside: 12 mm · Ø outside: 15 mm · Manufacturer: swiing® ingenious parts · Width: 14.2 mm · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
EUR 13.40
Moped fans like you also bought:
GPO 38 mm cylinder head original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Surface: sandblasted · Ø cylinder: 38 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Candle thread: short · Decompressor: No · Total length: 135 mm · Width: 125 mm · Height: 55 mm · Area of application: Standard
EUR 37.00
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Area of application: Standard
EUR 11.20
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm · Color: gray
EUR 21.30
swiing® revival screw set sprocket mounting galvanized | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Screw head: Hexagon · Width across flats SW: 10 mm · Thread length: 22 mm · Shank: No · Strength class: 8.8 · Number of components: 24 pcs · Color: silver
EUR 8.90
swiing® revival 12 mm carburetor (original) | Puch
Manufacturer: swiing® revival parts · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: gray · Carburetor type: SRE · Nominal diameter: 12 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.15 · Nozzle size: 52 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 65 mm · Width: 50 mm · Height: 108 mm · Area of application: Standard
EUR 78.70
swiing® revival 12 mm intake manifold | Puch E50
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Aluminum · Ø inside: 12 mm · Ø External connection: 20 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Total height: 53 mm · Height flange center hole: 43 mm · Total length: 45.5 mm · Area of application: Original
EUR 39.30
swiing 12 mm carburetor set | Puch E50
Manufacturer: swiing · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 12 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 12 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 52 · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 38 mm · Clamping screw torque (max.): 4 N/m · Area of application: Standard
EUR 118.10
Collection only possible with online purchase and appointment.
