Silicone tank emblem «Ciao» for your Piaggio Ciao moped / moped.
The sticker has the look of brushed aluminum and the golden yellow border around the lettering adds a visual accent.
The change from the small to the large stickers took place on the Ciao in the middle of the SC model series. As a result, this 115x27 mm sticker fits into all large tank inserts of the SC, PX and C24 models.
From the factory, this 3D sticker was installed in Switzerland on early C24 models from 1998 onwards, and was then replaced by the colored and cut-out «Ciao» 3D sticker on the last models produced before 2006.
Sticker dimensions: 115x27x2 mm
Material: silicone
Durability: petrol resistant
Price per piece.
The area to be covered should be free of grease and dirt in order to provide a firm hold for the adhesive.
You will find suitable cleaning cloths and other decals in the accessories section.
Quality product from the Italian manufacturer Piaggio in original equipment quality.
Original Piaggio spare part number: 813875
Alternative to the original Piaggio spare part number: 298723, 814489
Details
| Manufacturer | Piaggio |
| Material | Silicone |
| Rear side texture | Adhesive |
| Width | 115 mm |
| Mounting type | glue |
| Thickness | 2 mm |
| Height | 27 mm |
| Piaggio OEM number | 813875 |
| Alternative version of the Piaggio OEM number | 298723, 814489 |
Suitable for the following models
| Piaggio | Ciao - C24 |
Accessories & related products
Tank sticker "PIAGGIO" 3D silicone 115 x 27 mm original | Piaggio Ciao, SI, Bravo
Manufacturer: Piaggio · Material: Silicone · Place of use: Tank (+ frame) · Color: black · Color: silver · Rear side texture: Adhesive · Consistency: petrol resistant · Total length: 115 mm · Width: 27 mm · Height: 1.5 mm · Puch OEM number: 298723
EUR 14.70
Tank sticker "Ciao" 3D silicone 109 x 25 mm original | Piaggio Ciao
Manufacturer: Piaggio · Material: Silicone · Color: Chrome · Color: orange · Width: 109 mm · Height: 25 mm · Thickness: 1.2 mm · Rear side texture: Adhesive · Piaggio OEM number: 814489 · Alternative version of the Piaggio OEM number: 298723 · Alternative version of the Piaggio OEM number: 813875
EUR 15.80
Sticker gel "KAT" left & right side protection | Piaggio Ciao, SI, Grillo
Material: Rubber · Color: black · Color: gold · Color: gray · Color: yellow · Width: 155 mm · Height: 22 mm · Surface: rubberized · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Place of use: Housing cover · Border: contour cut
EUR 24.40
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Reserve level: 70 mm
EUR 11.30
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Tire height [%]: 100 · Valve type: TR4 Auto valve · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 "
EUR 11.30
NTN wheel bearing 12/28/8 rear cast hub Leleu | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 12 mm · Manufacturer: NTN · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Area of application: Standard · Material: Plastic · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Width: 8 mm · Stock number: 6001 · Ø outside: 28 mm · Ø inside: 12 mm · Ball bearing closed: Yes
EUR 6.70
ergotec handlebar stem 22 mm solid version.
Manufacturer: ergotec · Material: Aluminum · Material: Steel · Surface: chrome-plated · Surface: powder-coated · Total length: 240 mm · Drive: Hexagon socket · Color: black · Ø Stem: 22 mm · Clamping diameter: 25.4 mm · Width: 32 mm · Number of fixing points: 2 pcs
EUR 28.30
CIF Clamping screw front brake | Piaggio Ciao, SI, Bravo, Boxer
Material: Steel · Surface: galvanized (blue) · Manufacturer: CIF · Area of application: Standard · Number of components: 6 pcs · Drive: External hexagon · Thread type: M7x1 (standard thread) · Width across flats SW: 11 mm · Thread length: 19.5 mm · Screw head: Hexagon · Total length: 25 mm · Ø outside: 11 mm
EUR 4.45
Collection only possible with online purchase and appointment.
