High-quality thru axle M12x165 made of galvanized steel for various cast or wire spoke hubs on your Puch moped / moped.
The threaded shaft set is supplied with all axle nuts, spacers and intermediate sleeves assembled, as they will be installed later.
The cable ties show you where to fit what:
- Red cable tie: wheel hub
- green cable tie: brake anchor plate
- Yellow cable tie: Replacement disk for the speedometer drive (the disk is removed if a drive is fitted)
- Blue cable ties: fork braces
You can find more axle parts in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Ø shaft | 11.95 mm |
| Shank length | 75 mm |
| Total length | 165 mm |
| Thread length | 50 mm, 40 mm |
| Diameter | 12 mm |
| Thread type | MF12x1 (fine pitch thread) |
| Width across flats SW | 19 mm |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) |
Accessories & related products
swiing® ingenious wheel axle with bearing conversion kit spoke hub front Ø 29 mm | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Thread length: 40.5 mm · Thread length: 50 mm · Total length: 165 mm · Thread type: MF12x1 (fine pitch thread) · Height: 5.9 mm · Height: 9.9 mm · Ø shaft: 11.95 mm · Ø outside: 29.02 mm · Ø inside: 12 mm · Shank length: 74.5 mm · Ball bearing closed: Yes · Width across flats SW: 19 mm
EUR 44.20
GPO cast wheel hub front | Puch Maxi, X30 NG-2AH
Manufacturer: GPO · Material: Cast aluminum · Color: silver · Wheel size [inch]: 17 " · Ø axle: 12 mm · Width: 54.5 mm · Ø Receptacle: 92 mm · Ø outside: 118 mm · Ø drum: 80 mm · Ø bolt circle: 106 mm · Thread type: M8x1.25 (standard thread) · Thread length: 14 mm · Number of fixing points: 5 pcs
EUR 65.80
Not in stock
Hot 
Spoked rim 17" front aluminum CNC solid silver
Ø Nipple hole: 6.6 mm · Material: Aluminum · Surface: anodized · Wheel size [inch]: 17 " · Color: silver · Rim well depth: 7.5 mm · Nominal diameter: 438 mm · Ø axle: 12 mm · Number of spoke holes: 36 pcs · Ø spoke: 3.5 mm · Weight: 2700 g · Overall width outside: 47 mm · Jaw width: 34.6 mm · Jaw width [inch]: 1.4 " · Ø Brake drum: 80 mm
EUR 272.60
Hot
Spoked rim 17" front aluminum CNC solid black
Ø Nipple hole: 6.6 mm · Material: Aluminum · Surface: anodized · Color: black · Wheel size [inch]: 17 " · Rim well depth: 7.5 mm · Nominal diameter: 438 mm · Ø axle: 12 mm · Ø spoke: 3.5 mm · Overall width outside: 47 mm · Weight: 2700 g · Jaw width: 34.6 mm · Jaw width [inch]: 1.4 " · Ø Brake drum: 80 mm · Number of spoke holes: 36 pcs
EUR 272.60
Transval speedo drive 17" with 12 mm axle | Puch Maxi S, N, X30 NS, NL, N-2AH, Velux
Manufacturer: Transval · Material: Aluminum · Place of use: left · Place of use: right · Color: gray · Wheel size [inch]: 17 " · 4-edge speedometer cable: 2.6 mm · Thread type: MF10x1 (fine pitch thread) · Ø axle: 12 mm · Ø outside: 41 mm · Overall width outside: 60 mm · Ø mounting hole: 12.2 mm · Total height: 60 mm
EUR 40.80
Moped fans like you also bought:
swiing® revival wheel axle set M12x1 x 185 cast rear wheel galvanized | Puch
Ø outside: 11.8 mm · Manufacturer: swiing® revival parts · Total length: 185 mm · Material: Steel · Surface: galvanized (blue) · Thread type: MF12x1 (fine pitch thread) · Ø shaft: 11.9 mm · Thread length: 26 mm · Thread length: 52.5 mm · Shank length: 100 mm · Width across flats SW: 19 mm
EUR 16.90
Not in stock
swiing® revival screw set sprocket mounting Inox | Puch Maxi
Manufacturer: swiing® revival parts · Number of components: 24 pcs · Material: Chrome steel (known as Nirosta®) · Color: gray · Thread length: 22 mm · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Drive: External hexagon · Shank: No · Width across flats SW: 10 mm
EUR 14.70
GPO cast wheel hub front | Puch Maxi, X30 NG-2AH
Manufacturer: GPO · Material: Cast aluminum · Color: silver · Wheel size [inch]: 17 " · Ø axle: 12 mm · Width: 54.5 mm · Ø Receptacle: 92 mm · Ø outside: 118 mm · Ø drum: 80 mm · Ø bolt circle: 106 mm · Thread type: M8x1.25 (standard thread) · Thread length: 14 mm · Number of fixing points: 5 pcs
EUR 65.80
Not in stock
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø axle: 12 mm · Ø External brake pads: 80 mm · Ø outside: 91 mm · Total length: 187 mm · Ø bore: 12.2 mm · Cranking (offset): 8 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 55 mm · Ø screw holder: 6.5 mm
EUR 79.40
Collection only possible with online purchase and appointment.
