Wheel axle with closed groove ball bearings for rear Puch cast and spoke wheels.
The set consists of a 190 mm long wheel axle, two special ball bearings, three M12x1 nuts, a washer and two spacers. The dimension of the long spacers is 78.5 mm.
The innovation set works with original spoke and cast hubs.
Version 2.0: The already greased bearings now have an outer diameter of 29.02 mm, which ensures a better fit, and are fitted with a dust cover on both sides.
Mounting instructions: When mounting the ball bearings, it is important to note that the long spacer bush between the two ball bearings must be clamped to ensure that the two bearings press with the inner ring on the bush. If this is not observed, the ball bearings will inevitably jam.
Exceptional product for the highest demands of the swiing® quality brand.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Ø shaft | 19 mm |
| Shank length | 100 mm |
| Total length | 190 mm |
| Thread length | 29 mm, 53 mm |
| Ø inside | 12 mm |
| Diameter | 29 mm |
| Ø outside | 29 mm |
| Ball bearing closed | Yes |
| Thread type | MF12x1 (fine pitch thread) |
| Width across flats SW | 19 mm |
Suitable for the following models
| Puch |
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut galvanized
Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Nut type: Hexagon nut · Height: 10 mm · Width across flats SW: 19 mm · Area of application: Standard · Thread type: MF26x1 (fine pitch thread) · Thread depth: 10 mm · Strength class: 8
EUR 2.25
swiing® ingenious wheel axle with bearing conversion kit spoke hub front Ø 29 mm | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Thread length: 40.5 mm · Thread length: 50 mm · Total length: 165 mm · Thread type: MF12x1 (fine pitch thread) · Height: 5.9 mm · Height: 9.9 mm · Ø shaft: 11.95 mm · Ø outside: 29.02 mm · Ø inside: 12 mm · Shank length: 74.5 mm · Ball bearing closed: Yes · Width across flats SW: 19 mm
EUR 44.20
swiing® ingenious wheel bearing 12/29/9 spoke & cast rim | Puch Maxi
Bearing cage: "-" Sheet steel cage ball-guided · Inner ring width: 9 mm · Manufacturer: swiing® ingenious parts · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Material: Plastic · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Width: 9 mm · Ø outside: 29.02 mm · Ø inside: 12 mm · Ball bearing closed: Yes
EUR 10.10
swiing® revival wheel nut M12x1 x 4 SW17 galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF12x1 (fine pitch thread) · Drive: External hexagon · Width across flats SW: 17 mm · Height: 4 mm · Strength class: 8
EUR 3.30
66HEROES pointed nut "Spike" M12 Inox
Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Drive: External hexagon · Nut type: Pointed nut · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
EUR 7.85
Moped fans like you also bought:
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Valve type: TR4 Auto valve · Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Tire height [%]: 100 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5
EUR 11.30
swiing® ingenious wheel axle with bearing conversion kit spoke hub front Ø 29 mm | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Thread length: 40.5 mm · Thread length: 50 mm · Total length: 165 mm · Thread type: MF12x1 (fine pitch thread) · Height: 5.9 mm · Height: 9.9 mm · Ø shaft: 11.95 mm · Ø outside: 29.02 mm · Ø inside: 12 mm · Shank length: 74.5 mm · Ball bearing closed: Yes · Width across flats SW: 19 mm
EUR 44.20
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 11.30
swiing® ingenious wheel axle with bearing conversion kit cast hub front Ø 29 mm | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Ø inside: 12 mm · Width: 34.5 mm · Height: 5.9 mm · Height: 9.9 mm · Ø outside: 29.02 mm · Width across flats SW: 19 mm · Thread length: 40.5 mm · Thread length: 50 mm · Total length: 165 mm · Ø shaft: 11.95 mm · Thread type: MF12x1 (fine pitch thread) · Shank length: 74.5 mm · Ball bearing closed: Yes
EUR 44.20
Collection only possible with online purchase and appointment.
