Hot 
Camouflaged 17 mm tuning intake bend suitable for Puch Maxi mopeds / mopeds which have an E50 engine installed.
The intake bend has been specially developed for use with the swiing ingenious 17 mm SRF carburetor with Ø 23 mm connection. In addition, the Puch logo and the 12 have been cast into the outside for optimum camouflage like the original.
With this combination, you get the full potential out of your engine and are still perfectly camouflaged from the outside.
Ø inside: 17 mm
Ø connection: 23 mm
Height (flange - center bore): 42 mm
Total height: 53.5 mm
Hole spacing: 38 mm
To ensure that the air filter fits perfectly on the frame, it is imperative that the 3 mm inlet gasket is used.
You can find the right carburetor, air filter, gasket and a complete set for your Maxi in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Area of application | Tuning, Racing, Performance |
| Ø inside | 17 mm |
| Ø External connection | 23 mm |
| Total length | 38 mm |
| Mounting type | Stud bolts & nuts |
| Hole spacing inlet | 38 mm |
| Total height | 53.5 mm |
| Height flange center hole | 42 mm |
| Number of fixing points | 2 pcs |
| Camouflaged | Yes |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing 15 mm carburetor set camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Choke control: Hand choke · Carburetor type: SRE · Nominal diameter: 15 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Area of application: Tuning · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 5 mm · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Mounting type: Stud bolts & nuts · Hole spacing inlet: 38 mm · Clamping screw torque (max.): 4 N/m
EUR 118.10
swiing® revival nozzle M3.5 (41 - 120 of your choice) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100
EUR 4.40
GPO air filter | Puch Supermaxi LG1, LG2 Cat
Manufacturer: GPO · Material: Plastic · Color: black · Filter type: Foam · Filter type: Racing screen · Filter type: Standard sieve · Mounting type: Plug connection clamped · Ø Internal connection: 28 mm · Area of application: Standard · Area of application: Tuning · Camouflaged: Yes
EUR 28.00
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 17 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Total length: 65 mm · Ø Air filter connection: 27.5 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5 mm · Width: 47 mm · Mixed oil connection: No · Height: 89 mm · Height: 109 mm · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle block: 2.2 · Camouflaged: Yes · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 135.00
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503 AAL, 2AL/2BL, ABL, AB, AC, ADV
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 17 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Total length: 64.8 mm · Ø Air filter connection: 27.5 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5 mm · Width: 47 mm · Mixed oil connection: No · Height: 89 mm · Height: 110 mm · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle block: 2.2 · Camouflaged: Yes · Clamping screw torque (max.): 3 N/m
EUR 135.00
swiing® revival 4 mm flange gasket 17 mm intake manifold square | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Material: Oiled paper · Material: Phenolic resin (known as Bakelite®) · Thickness: 4 mm · Nominal diameter: 17 mm · Ø inside: 17 mm · Hole spacing inlet: 38 mm · Ø screw holder: 6.2 mm
EUR 8.45
Moped fans like you also bought:
swiing nozzle set M3.5 (76 - 86) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Component group Carburetor: Spraying · Material: Brass · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 76 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 84 · Nozzle size: 86 · Total length: 6 mm · Drive: Slot
EUR 17.90
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 17 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 74 · Ø Inside entrance: 17 mm · Ø Internal connection: 23 mm · Ø Output inside: 17.1 mm · Total length: 65 mm · Ø Air filter connection: 27.5 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 5 mm · Width: 47 mm · Mixed oil connection: No · Height: 89 mm · Height: 109 mm · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle block: 2.2 · Camouflaged: Yes · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 135.00
Collection only possible with online purchase and appointment.
