Montageanleitung
Set
Hot 
Slotted 41 mm racing cylinder made of aluminum for Swiss Sachs 50/2 (502) engines, which were installed on the following moped / moped models, among others: Alpa, Caravelle, Comet, DKW, Eiger, Göricke, Hercules, Prior, Pony Junior, Rico, Rixe, Walco etc.
Version 2.0:
The tuned aluminum cylinder has been extensively tested and further developed over the last few years and is now available with even more torque.
With larger displacement, optimized timing, larger intake and exhaust as well as enlarged overflow channels, your oldie becomes a high-flyer.
The tuned aluminum racing kit was developed and tested for years in Switzerland and is now finally available in version 2.0.
The new version delivers even more torque than the predecessor, without compromising in the mid and upper rev range.
The cylinder head, which can only be used for tuning cylinders in this series, is equipped with a raceway centering system. This ensures that the combustion chamber is perfectly aligned and the piston is not at TDC.
These attributes characterize the cylinder kit:mer
Scope of delivery:
- Cylinder Ø 41 mm
- Piston kit incl. Piston rings, pins (12 mm) and pin locks
- Cylinder head
- Gasket set
- Inlet and cylinder head stud bolts incl. Special nuts
We recommend taking the following precautions:
- The cylinder should be run in with semi-synthetic mixture oil in a ratio of 1:33 (3%) during the first fill-up at a maximum of 5000 rpm.
- The cylinder head stud bolts should be glued into the cylinder with a threadlocker.
- For optimum centering and easier installation of the cylinder base, we recommend using the M5/M6 special stud bolt set.
- For maximum performance, a 17 mm SSB carburettor can be installed. The intake window of the cylinder should be adapted to the carburettor.
All items mentioned are listed under accessories.
Exceptional product for the highest demands of the quality brand swiing®.
The set includes the following fixed parts:
Hole pattern [mm]: 60 x 40 / 37 x 37 · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 45 mm · Ø outlet inside: 20.5 mm · Ø Inlet inside: 15.3 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: M35x2 (standard thread) · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: No · Area of application: Tuning
Hole pattern [mm]: 37 x 37 · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 mm · Ø outside: 95 mm · Camouflaged: No · Number of fixing points: 4 pcs · Ø screw holder: 6.7 mm · Candle thread: short · Decompressor: M10x1.5 · Total length: 126.6 mm · Width: 95 mm · Height: 44.8 mm · Area of application: Tuning
Details
| Nominal diameter | 41 mm |
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Surface | sandblasted |
| Displacement | 55 ccm |
| Area of application | Racing |
| Crankshaft stroke | 42 mm |
| Ø cylinder neck | 45 mm |
| Number of fixing points | 4 pcs |
| Camouflaged | No |
| Ø Inlet inside | 15.3 mm |
| Ø outlet inside | 20.5 mm |
| Thread inlet | M6x1 (standard thread) |
| Ø piston pin (B) | 12 mm |
| Hole spacing inlet | 31 mm |
| Outlet type | Union nut |
| Thread outlet | M35x2 (standard thread) |
| Hole pattern [mm] | 60 x 40 / 37 x 37 |
Suitable for the following models
| Sachs | 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) |
Accessories & related products
Dell'Orto 16/16 SHA carburetor hand choke
Nominal diameter: 16 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: SHA · Width: 72 mm · Choke control: Hand choke · Height: 111 mm · Total length: 82 mm · Area of application: Tuning · Ø fuel hose connection: 5.1 mm · Ø fuel hose connection: 6 mm · Ø Internal connection: 19 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 16 mm · Mounting type: Plug connection clamped · Ø Output inside: 16 mm · Ø Air filter connection: 56 mm · Ø Air filter connection: 58.5 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 82
EUR 79.40
Not in stock
Loctite 638 High-strength adhesive 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Color: green · Adhesion: high-strength · Type of application: 1K · Gap dimension (max.): 0.25 mm · Alignment time: 300 sec · Temperature resistance (min.): -75 - 150 °C · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m · Area of application: Chemistry
EUR 24.90
EUR 2’490.00/l
swiing resonance exhaust set Ø 28 / 70 mm | Sachs 50/2
Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 730 mm · Color: Chrome · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Union nut
EUR 170.30
swiing carburetor 17 mm Bing SSB 1/17/69
Manufacturer: swiing · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Width: 85 mm · Carburetor type: SSB · Nominal diameter: 17 mm · Total length: 132 mm · Height: 100 mm · Mounting type: Flange · Area of application: Standard · Area of application: Tuning · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Nozzle size: 76 · Hole spacing inlet: 31 mm
EUR 145.80
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Nominal diameter: 13 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Standard · Area of application: Tuning · Width: 87 mm · Carburetor type: SSB · Height: 85 mm · Total length: 132 mm · Mounting type: Flange · Ø fuel hose connection: 6 mm · Nozzle size: 75 · Hole spacing inlet: 31 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Camouflaged: No
EUR 145.80
swiing stud bolt set M6 / M5 Sachs (12.9 strength) Special
Manufacturer: swiing · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Diameter: 6 mm · Drive: External hexagon · Thread length: 9.5 mm · Thread length: 14 mm · Total length: 27.3 mm · Width across flats SW: 8 mm · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Strength class: 10 · Strength class: 12.9
EUR 21.80
swiing® ingenious piston 41 mm | Sachs 50/2
Manufacturer: swiing® ingenious parts · Nominal diameter: 41 mm · Ø outside piston (A): 40.96 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.4 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 1.5 mm · Piston weight: 91 g
EUR 66.60
swiing® ingenious 16 mm intake manifold Dell'Orto SHA | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: graphite colors · Ø inside: 16 mm · Ø External connection: 19 mm · Mounting type: Screws · Hole spacing inlet: 31 mm · Number of fixing points: 2 pcs · Area of application: Tuning
EUR 55.50
Moped fans like you also bought:
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing cage: Brass cage ball-guided · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Groove ring: No · Material: Brass · Material: Steel · Surface: blank · Bearing type: Shoulder bearing · Width: 8 mm · Stock number: E15 · Ø outside: 35 mm · Ø inside: 15 mm · Area of application: Standard · Ball bearing closed: No · Sachs OEM no.: 0232 017 006 · Pony OEM number: A1149
EUR 28.30
Carburetor 17 mm Bing SSB 1/17/69 reproduction
Nominal diameter: 17 mm · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Standard · Area of application: Tuning · Width: 86 mm · Carburetor type: SSB · Height: 99 mm · Total length: 116 mm · Mounting type: Stud bolts & nuts · Ø fuel hose connection: 6.2 mm · Nozzle size: 76 · Hole spacing inlet: 31 mm · Mixed oil connection: No · Vacuum connection: Yes · Choke control: without choke · Nozzle thread: MF7x0.75 (fine pitch thread) · Camouflaged: No · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 90.80
swiing® revival carburetor 13 mm Bing SSB 1/13/4
Nominal diameter: 13 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Standard · Area of application: Tuning · Width: 87 mm · Carburetor type: SSB · Height: 85 mm · Total length: 132 mm · Mounting type: Flange · Ø fuel hose connection: 6 mm · Nozzle size: 75 · Hole spacing inlet: 31 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Camouflaged: No
EUR 145.80
swiing stud bolt set M6 / M5 Sachs (12.9 strength) Special
Manufacturer: swiing · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Diameter: 6 mm · Drive: External hexagon · Thread length: 9.5 mm · Thread length: 14 mm · Total length: 27.3 mm · Width across flats SW: 8 mm · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Strength class: 10 · Strength class: 12.9
EUR 21.80
swiing® revival ball bearing countershaft | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A2531)
Bearing cage: "-" Sheet steel cage ball-guided · Ø inside: 15 mm · Ø outside: 35 mm · Inner ring width: 25.6 mm · Manufacturer: swiing® revival parts · Bearing clearance: CN (standard) · Material: Steel · Stock number: E15 · Area of application: High End · Area of application: Standard · Bearing type: Deep groove ball bearing · Width: 8 mm · Thread type: MF20.8x1 LH (fine/left-hand thread) · Pony OEM number: A2531 · Sachs OEM no.: 0286 079 105
EUR 56.70
Collection only possible with online purchase and appointment.
