&p>Transition piece for the Siggnature saddle base and the «Tuck & Roll» genuine leather saddle.
The custom shell «genuine leather» on the accessories in conjunction with the substructure can be easily fitted to your moped, moped and small motorcycle.
The use of these two adapter pieces is necessary because the rear threaded sockets on the saddle are not parallel to the lower surface and the nut would therefore be tightened at an angle.
Ø bore: 8.3 mm (for M8)
Ø outer: 25 mm
Total height: 24 mm
Corresponding attachments such as saddle shell, saddle clamps, substructure etc. can be found in the accessories section.
A kick-ass custom product straight from the Siggnature workshop
.Details
| Manufacturer | Siggnature |
| Color | black |
| Ø bore | 8 mm |
| Height | 24 mm |
| Thread size | M8 |
| Ø outside | 25 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 24.90
EUR 2’490.00/l
Cap nut M4 - M10 Inox
Material: Chrome steel (known as Nirosta®) · Nut type: Cap nut · Thread type: M10x1.5 (standard thread) · Thread type: M4x0.7 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M7x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Drive: External hexagon
EUR 0.90
66HEROES pointed nut "Bullit" M5 - M12 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Nut type: Pointed nut · Drive: External hexagon · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
EUR 7.85
66HEROES pointed nut "Spike" M5 - M12 Inox
Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Drive: External hexagon · Nut type: Pointed nut · Thread type: M10x1.5 (standard thread) · Thread type: M12x1.75 (standard thread) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread)
EUR 7.85
Moped fans like you also bought:
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Manufacturer: swiing® revival parts · Material: Nylon · Surface: blank · Color: black · Bearing type: Plain bearing · Total length: 19 mm · Ø outside: 20.2 mm · Ø inside: 16.2 mm · Ø Bundle: 24.1 mm · Puch OEM number: 349.1.42.005.1
EUR 2.85
Handlebar fork plate 30 cm curved black
Manufacturer: Made in Portugal · Material: Steel · Surface: varnished · Color: black · Width: 610 mm · Height: 300 mm · Fork plate holder length: 75 mm · Clamping diameter: 22 mm · Ø outside: 22 mm · Mounting type: Fork plate · Length handlebar ends: 145 mm · Crossbar: No
EUR 44.10
swiing® revival screw set Motor Inox | Puch E50
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: blank · Drive: Hexagon socket · Drive: Slot · Screw head: Countersunk head · Screw head: Cylinder head · Area of application: Standard · Puch OEM number: 900.1216 · Puch OEM number: 900.1308
EUR 22.60
Collection only possible with online purchase and appointment.
