Hot 
Handmade aluminum side covers for your Sachs 503 Pony Junior, Sachs 503 GT and other Sachs moped / moped models.
The side covers are of the highest quality and are an absolutely worthy alternative to the original side plates that have not been available for a long time.
Every detail is almost perfectly modeled on the original. The covers can either be installed directly or painted.
Dimensions of the side panels:
Total length: 630 mm
Width: 70 mm
Distance of the mounting holes rear - center: 280 mm
Distance of the mounting holes center - front: 210 mm
To avoid any stress cracks or cracks caused by vibrations, the chain sliders should be mounted on rubber (vibration dampers).
Corresponding attachments such as clamping screw, footboard etc. can be found under accessories.
A quality product manufactured in Switzerland.
Details
| Manufacturer | Made in Switzerland |
| Material | Aluminum |
| Color | silver |
| Surface | blank |
| Total length | 630 mm |
| Width | 70 mm |
| Height | 145 mm |
| Ø mounting hole | 6 mm |
| Number of fixing points | 6 pcs |
Suitable for the following models
| Sachs |
Accessories & related products
Hot
Rear light ULO | Sachs, Puch
Test mark: none · Tension: 6 V · Ø Receptacle: 5 mm · Material: Aluminum · Material: Steel · Color: Chrome · Color: red · Bulb holder: E10 · Width: 57 mm · Depth: 55 mm · Height: 90 mm · Battery operated: No · Brake light: No · Reflectors: Yes · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs
EUR 66.70
Not in stock
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Thread length: 8 mm · Total length: 145 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Height: 5.3 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm
EUR 12.40
Magura set screw M6x34 mm lock nut SW8
Thread type: M6x1 (standard thread) · Thread length: 24 mm · Total length: 34 mm · Slotted: No · Ø Receptacle: 7.05 mm · Manufacturer: Magura · Ø cable holder: 3.05 mm · Width across flats nut: 8 mm · Width across flats Screw: 8 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated
EUR 2.85
swiing® revival wheel axle M10.5x1 x 175 coaster brake galvanized
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread length: 34 mm · Thread length: 45 mm · Total length: 175 mm · Ø shaft: 10.5 mm · Thread type: MF10.5x1 (fine pitch thread) · Shank length: 95.6 mm
EUR 27.20
Continental 2.00 - 2.50 x 17" tube
Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR6 car valve · Wheel size [inch]: 17 "
EUR 16.90
Magura cable clamp Sachs shift/clutch arm
Ø outside: 7 mm · Total length: 11 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats SW: 6 mm · Thread type: M4x0.7 (standard thread) · Manufacturer: Magura · Thread length: 7 mm · Ø Cable bushing: 2.8 mm · Ø shaft: 4 mm · Ø Bundle: 7 mm · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated
EUR 2.85
Clamps, nipples & set screws set 73 pcs.
Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Surface: raw · Drive: External hexagon · Drive: Knurled screw · Drive: Slot · Screw head: Hexagon · Storage method: Plastic box · Dimension storage box: 18.5 x 11.0 x 1.8 cm · Number of components: 73 pcs
EUR 68.10
Collection only possible with online purchase and appointment.
