Shaft seal ring (also known under the popular brand name Simmerring®) with PTFE sealing lip (also known under the popular brand name Teflon®) with the dimensions 15/24/5 mm (15x24x5) for use on the crankshaft of your Piaggio Ciao, Si, Bravo and Boxer moped / moped.
This radial shaft seal with fluorine rubber outer jacket is resistant up to a temperature of 200°C, whereas conventional NBR shaft seals are only resistant up to 100°C.
This radial seal ring made of FPM / FKM (also known under the trademarked brand name VITON®) has an additional sealing lip made of PTFE, a material with high thermal resistance that does not interact with the lubricant and can therefore withstand the highest loads.
The set includes the following fixed parts:
Manufacturer: Polini · Material: FPM / FKM (known as VITON®) · Surface: rubberized · Area of application: Racing · Place of use: Universal · Temperature resistance (min.): -30 - 200 °C · Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm
Details
| Simmering type | AS - With rubberized outer casing / one sealing lip / one dust lip. |
| Width | 5 mm |
| Manufacturer | Polini |
| Material | FPM / FKM (known as VITON®) |
| Surface | rubberized |
| Area of application | Racing |
| Place of use | Crankshaft |
| Ø outside | 24 mm |
| Ø inside | 15 mm |
| Temperature resistance (min.) | -30 - 200 °C |
Suitable for the following models
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
Malossi oil seal FPM 15/24/5 A crankshaft | Piaggio Ciao, SI, Bravo, Boxer
Place of use: Crankshaft · Temperature resistance (min.): -30 - 200 °C · Simmering type: A - With rubberized outer part / one sealing lip. · Width: 5 mm · Ø inside: 15 mm · Ø outside: 24 mm · Manufacturer: Malossi · Material: FPM / FKM (known as VITON®) · Surface: rubberized
EUR 16.10
Oil seal FPM 15/24/5 AS crankshaft original | Piaggio Ciao, SI, Bravo & Boxer
Temperature resistance (min.): -30 - 200 °C · Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Width: 5 mm · Place of use: Crankshaft · Manufacturer: Piaggio · Material: FPM - Fluororubber · Surface: rubberized · Ø inside: 15 mm · Ø outside: 24 mm
EUR 10.30
Moped fans like you also bought:
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Diameter: 12 mm · Diameter: 24 mm · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Width across flats (trigger): 10 mm · Width across flats (trigger): 18 mm · Width across flats Screw: 19 mm · Manufacturer: swiing® ingenious parts · Total length: 100 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Number of components: 2 pcs
EUR 20.20
SKF 6202 C3 ball bearing 15/35/11
Bearing type: Deep groove ball bearing · Stock number: 6202 · Width: 11 mm · Inner ring width: 11 mm · Manufacturer: SKF · Bearing clearance: C3 · Bearing cage: "-" Sheet steel cage ball-guided · Ø outside: 35 mm · Ø inside: 15 mm · Puch OEM number: 900.4.6202
EUR 11.20
Polini oil seal FPM / PTFE 15/24/5
Place of use: Universal · Temperature resistance (min.): -30 - 200 °C · Simmering type: AS - With rubberized outer casing / one sealing lip / one dust lip. · Ø inside: 15 mm · Ø outside: 24 mm · Width: 5 mm · Manufacturer: Polini · Material: FPM / FKM (known as VITON®) · Surface: rubberized · Area of application: Racing
EUR 16.30
Collection only possible with online purchase and appointment.
