38.0 mm piston with two 2 mm rectangular piston rings with flank lock (FS) for use in Meteor cast iron cylinders suitable for your Sachs 502, 50/2, 503 2AL, AAL, 2BL, ABL CH moped / moped.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the piston rings used, their stems and locking types on the legend in the pictures.
This special piston has a molybdenum coating. In combination with oil, this results in technologically advanced wear protection with outstanding sliding properties.
Commonly used for cylinders subject to heavy loads (racing cylinders).
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Original spare part number: A2772
Quality product from the Italian manufacturer Meteor.
Details
| Manufacturer | Meteor Racing |
| Surface | molybdenum-coated |
| Nominal diameter | 38 mm |
| Ø outside piston (A) | 37.95 mm |
| Ø piston pin (B) | 12 mm |
| Compression height (C) | 28 mm |
| Curvature (D) | 3 mm |
| Total piston height (E) | 53 mm |
| Number of piston rings (F) | 2 pcs |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Flank safety device (FS) |
| Piston ring height | 2 mm |
| Thick piston ring | 1.6 mm |
| Piston weight | 79 g |
Suitable for the following models
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Number of components: 7 pcs · Material: Steel · Surface: burnished · Area of application: (Dis)assembly tool · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
EUR 22.60
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Number of components: 1 pcs · Material: Steel · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Width across flats Screw: 19 mm · Area of application: (Dis)assembly tool · Strength class: 8.8
EUR 11.30
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 11.30
EUR 25.11/l
Meteor piston 38 mm | Sachs 50/2, 503 (A2772)
Manufacturer: Meteor · Ø outside piston (A): 37.95 mm · Compression height (C): 28 mm · Curvature (D): 3 mm · Total piston height (E): 53 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Thick piston ring: 1.6 mm · Ø piston pin (B): 12 mm · Piston weight: 79 g · Sachs OEM no.: 0286 377 010 · Sachs OEM no.: 0286 378 005 · Pony OEM number: A2772 · Pony OEM number: A4358
EUR 56.70
swiing® revival Silentblock Ø 19.3 x 19 mm | Sachs 50/2 (A1940)
Manufacturer: swiing® revival parts · Material: Rubber · Material: Steel · Surface: raw · Color: black · Total length: 19 mm · Ø outside: 19.3 mm · Ø inside: 8.5 mm · Ø Bundle: 13 mm · Ø Bundle: 15 mm · Waistband height: 1.5 mm · Area of application: Standard · Sachs OEM no.: 0260 101 000 · Pony OEM number: A1940
EUR 7.85
swiing® revival gasket set 38 mm cylinder | Sachs 503
Manufacturer: swiing® revival parts · Number of components: 3 pcs · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 38 mm · Area of application: Standard · Area of application: Tuning · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Decompressor: No · Hole spacing inlet: 32 mm
EUR 12.40
swiing® revival gasket cylinder head 38 mm cylinder | Sachs 503, 502, 50/2, 50/3, 50/4
Manufacturer: swiing® revival parts · Material: Aluminum · Place of use: Cylinder head · Nominal diameter: 38 mm · Ø cylinder: 38 mm · Area of application: Standard · Hole pattern [mm]: 37 x 37 · Thickness: 0.2 mm
EUR 5.55
Collection only possible with online purchase and appointment.
