Revised 2021 version of one of the best cylinder kits available for Piaggio Si, Bravo 2 and 3 and Grillo mopeds / mopeds.
This is the version with 10 mm piston pin and the older version of the cylinder head.
This cast iron cylinder offers a very good increase in performance over the entire rev range and makes it one of the most popular 63 cc racing cylinders for Piaggio.
The workmanship is very clean and the matching of the piston windows to the overflow channels and boost parts is also very good. The webs in the area of the cylinder head significantly reduce the risk of piston jamming and make the cylinder extremely durable.
The cylinder head with its original look ensures good compression with its combustion chamber shape matched to the cylinder and piston.
With the reworking, the triangular shape of the cylinder head was adapted to a longitudinal shape. As a result, the cylinder fits much better on racing gear such as the Polini Speed Engine, but less well on the original gear. Fortunately, there is enough sealing surface available so that you can bring the channels back into a triangular shape on the cylinder if necessary.
The set includes the following fixed parts:
Hole pattern [mm]: 55 x 34 · Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Decompressor: Yes · Camouflaged: No · Area of application: Tuning
Hole pattern [mm]: 35 x 55 · Manufacturer: Malossi · Material: Aluminum · Ø cylinder: 41 - 43 mm · Camouflaged: No · Number of fixing points: 3 pcs · Candle thread: short · Decompressor: Yes · Total length: 134 mm · Width: 94 mm · Height: 52 mm · Area of application: Racing
Details
| Nominal diameter | 43 mm |
| Manufacturer | Malossi |
| Material | Gray cast iron |
| Area of application | Tuning |
| Surface | sandblasted |
| Displacement | 63 ccm |
| Crankshaft stroke | 43 mm |
| Ø piston pin (B) | 10 mm |
| Number of fixing points | 3 pcs |
| Outlet type | clamped |
| Decompressor | Yes |
| Camouflaged | No |
Suitable for the following models
| Piaggio | Si Bravo / Super Bravo Grillo |
Accessories & related products
SITO Plus exhaust Ø 24 mm | Piaggio SI, Grillo
Manufacturer: SITO · Material: Steel · Color: black · Ø outside: 14 mm · Surface: varnished · Total length: 720 mm · Ø Silencer: 70 mm · Ø Internal connection: 22.3 mm · Ø Flame tube outside: 25 mm · Exhaust type: Cylindrical · Mounting type: Welded lug · Flame tube attachment: Plug connection clamped · Number of fixing points: 1 pcs
EUR 90.00
Jasil crankshaft "Racing" 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Jasil · Material: Steel · Cheek type: standard · Crankshaft stroke: 43 mm · Ø coupling pin / vario pin: 12 mm · Connecting rod length center-center: 87 mm · Total length crankpin ignition side: 91.5 mm · Total length crankpin ignition side: 105 mm · Ø crank webs: 69.8 mm · Ø piston pin (B): 10 mm · Ø Connecting rod eye: 13 mm · Bearing seat right: 15 mm · Ø Bearing seat (ignition side): 15 mm · Thread type: M8x1.25 (standard thread) · Thread length: 13.5 mm · Dimension needle bearing: 10 / 13 x 14.2 mm (axe 10) · Wide crank webs: 32.9 mm · Length 1st paragraph: 21.5 mm · Length 2nd paragraph: 44 mm · Length 3rd paragraph: 64.9 mm · Ø 1st step (on the coupling side): 15 mm · Ø 2nd shoulder (on the clutch side): 14.4 mm · Ø 3rd step (on the clutch side): 12 mm · Weight: 716 g · Number of gears: 1 pcs · Area of application: Racing
EUR 146.20
Polini Speed Engine engine case breaker ignition | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Polini · Material: Aluminum · Surface: sandblasted · Color: silver · Crankshaft stroke: 43 mm · Ignition type: Breaker · Stock number: 6202 · Total length: 215 mm · Width: 175 mm · Height: 104 mm
EUR 236.30
Malossi cylinder head for 41 - 43 mm cylinder kit | Piaggio SI, Bravo
Manufacturer: Malossi · Material: Aluminum · Total length: 134 mm · Height: 52 mm · Ø cylinder: 41 - 43 mm · Area of application: Racing · Width: 94 mm · Candle thread: short · Number of fixing points: 3 pcs · Hole pattern [mm]: 35 x 55 · Decompressor: Yes · Camouflaged: No
EUR 78.70
Malossi tuning set 43 mm | Piaggio SI, Bravo, Grillo
Nominal diameter: 44 mm · Manufacturer: Dell'Orto · Manufacturer: Malossi · Manufacturer: NGK · Manufacturer: SITO · Manufacturer: swiing · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Area of application: Tuning · Ø piston pin (B): 10 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Decompressor: Yes · Camouflaged: No
EUR 422.10
Dell'Orto 13/13 SHA carburetor & racing air filter set | Piaggio SI, Boss, Grillo
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Manufacturer: Malossi · Component group Carburetor: Carburetor complete · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Total length: 55 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Height: 118 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Area of application: Tuning · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Width: 60 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Mounting type: Plug connection clamped
EUR 85.50
swiing® ingenious stud bolt M7x120 / Ø 7.3 shank - 10.9 strength
Diameter: 7.3 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Total length: 120 mm · Thread type: M7x1 (standard thread) · Thread length: 20 mm · Thread length: 30 mm · Strength class: 10.9
EUR 5.50
Moped fans like you also bought:
GPO license plate holder Inox
Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Color: silver · Total length: 145 mm · Height: 5.3 mm · Ø mounting hole: 5 mm · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Number of fixing points: 2 pcs
EUR 12.30
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Area of application: Standard · Cable length: 2200 mm
EUR 3.15
Malossi air filter | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Material: Plastic · Color: black · Ø outside: 53.2 mm · Total length: 31.2 mm · Filter type: Foam · Height: 88.7 mm · Area of application: Tuning · Ø Internal connection: 51 mm · Width: 95 mm · Mounting type: Plug connection clamped · Camouflaged: No
EUR 22.40
SITO Plus exhaust Ø 24 mm | Piaggio SI, Grillo
Manufacturer: SITO · Material: Steel · Color: black · Ø outside: 14 mm · Surface: varnished · Total length: 720 mm · Ø Silencer: 70 mm · Ø Internal connection: 22.3 mm · Ø Flame tube outside: 25 mm · Exhaust type: Cylindrical · Mounting type: Welded lug · Flame tube attachment: Plug connection clamped · Number of fixing points: 1 pcs
EUR 90.00
Malossi 43 mm cylinder kit 10 mm KoBo new version | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 43 mm · Manufacturer: Malossi · Material: Gray cast iron · Displacement: 63 ccm · Surface: sandblasted · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Area of application: Tuning · Ø piston pin (B): 10 mm · Outlet type: clamped · Number of fixing points: 3 pcs · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
EUR 163.10
Malossi cylinder head for 41 - 43 mm cylinder kit | Piaggio SI, Bravo
Manufacturer: Malossi · Material: Aluminum · Total length: 134 mm · Height: 52 mm · Ø cylinder: 41 - 43 mm · Area of application: Racing · Width: 94 mm · Candle thread: short · Number of fixing points: 3 pcs · Hole pattern [mm]: 35 x 55 · Decompressor: Yes · Camouflaged: No
EUR 78.70
Dell'Orto 13/13 SHA carburetor | Piaggio SI, Boss, Grillo
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Total length: 55 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Height: 118 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Area of application: Tuning · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Width: 60 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Mounting type: Plug connection clamped · Camouflaged: No
EUR 78.70
Collection only possible with online purchase and appointment.
