Complete ignition with VEC coil and 6 volt light coil for left-turning two-speed engines on mopeds / mopeds such as Puch X30 Sport, Puch X30 Velux / Sachs 50/2, Sachs 503 or Zündapp Belmondo.
The set includes all parts such as fastening screws, flywheel nut with wedge, ignition plate, ignition and light coil, pole wheel and spark plug connector.
The components are supplied individually and still need to be assembled.
Direction of rotation: Left (counterclockwise)
Operating voltage of the light system: 6 volts
Wattage of the light system: 17 watts
Ø inside flywheel: 90 mm
Attention: A spark plug connector with at least 10 kOhm discharge must be used, the spark plug must not be discharged!
With Beru or MERIT spark plug connectors, misfiring may occur.
Adjusting the ignition:
In principle, nothing needs to be adjusted on the ignition. Only the ignition plate can be turned slightly for a perfect ignition spark, the rest is regulated by the ignition chip.
In the basic setting, the three fastening screws of the ignition plate are located in the middle of the slotted holes. Pre-tensioning is achieved by turning the ignition plate against the direction of motor rotation. Fine adjustment is carried out at medium speed using the strobe light. The electrode gap on the spark plug must be set to 0.7-0.8 mm in advance.
The ignition timing adjustment gun as well as other tools and individual parts for your ignition can be found in the accessories section.
The set includes the following fixed parts:
Manufacturer: GPO · Pony OEM number: A2133, A5532 · Sachs OEM no.: 0265 140 005, 0265 206 000
Manufacturer: GPO · Material: Steel · Tension: 6 V · Performance: 17 W · Direction of rotation: left · Ø cone small inside: 11.5 mm · Ø cone large inside: 15 mm · Cone length: 18.5 mm · Cone ratio: 1:5 · Ø Internal flywheel: 91.1 mm · Ø Flywheel outside: 116.5 mm · Thread type: MF26x1.5 (fine pitch thread) · Thread length: 8 mm · Weight: 900 g · Height: 36.1 mm · Pony OEM number: A2600 · Sachs OEM no.: 0286 175 005
Manufacturer: NGK · Material: Plastic, Rubber · Color: black · Ø cable: 5 mm, 7 mm · Spark plug socket: SAE · Cable available: No · Suppressed: Yes · Resistance: 10000 Ω · Component group Carburetor: Spraying
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nut type: Flange nut · Drive: External hexagon · Thread type: MF10x1 (fine pitch thread) · Ø outside: 18.8 mm · Height: 8.9 mm · Width across flats SW: 14 mm · Pony OEM number: A4513 · Sachs OEM no.: 0942 072 102
Material: Steel · Total length: 9.15 mm · Width: 3 mm · Height: 3.7 mm
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Alternative version of the Puch OEM number: 900.3202, 900.1509
Manufacturer: GPO · Tension: 6 V · Performance: 17 W · Ø Internal flywheel: 90 mm · Height: 22.2 mm · Total length: 76.5 mm, 600 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.7 mm · Hole spacing: 54 mm · Area of application: Standard · Pony OEM number: A2110, A5526 · Sachs OEM no.: 0265 113 003, 0265 204 000
Manufacturer: VEC · Place of use: Internal (in the ignition) · Ø Internal flywheel: 90 mm · Ø cable holder: 5 mm · Cable length: 140 mm, 420 mm · Color: black · Total length: 77 mm · Height: 48 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Hole spacing: 54 mm · Area of application: Standard, Original, Performance
Details
| Manufacturer | VEC, GPO |
| Tension | 6 V |
| Area of application | Tuning, Standard |
| Direction of rotation | left |
| Performance | 17 W |
| Ø Internal flywheel | 90 mm |
| Ø cable | 5 mm |
| Mounting type | Screws |
Suitable for the following models
| Puch | ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 505 (with pedal shaft) - 1A (AT), 2A (HG) 535 |
| Zündapp Belmondo |
Accessories & related products
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Number of components: 1 pcs · Total length: 55 mm · Total length: 75 mm · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8
EUR 11.30
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Area of application: Tuning · Tension: 12 V · Light coil voltage: 12 V · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Performance: 60 W · Ø Internal flywheel: 61.5 mm · Mounting type: Screws · Number of fixing points: 6 pcs · Weight: 340 g
EUR 340.80
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Manufacturer: swiing® ingenious parts · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Diameter: 19 mm · Number of components: 1 pcs · Ø inside: 27 mm · Ø outside: 93 mm · Total length: 290 mm · Thickness: 5 mm · Height: 80 mm · Ø Pin: 8 mm
EUR 54.40
swiing® revival ignition set (Bosch / Ducati / swiing®)
Manufacturer: swiing® revival parts · Area of application: Standard · Tension: 6 V · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 5 mm · Performance: 17 W · Ø Internal flywheel: 90 mm · Number of fixing points: 3 pcs · Alternative version of the Pony OEM number: A2656 · Alternative version of the Sachs OEM number: 0283 130 004 · Alternative version of the Sachs OEM number: 0286 254 008
EUR 176.00
Hot 
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Manufacturer: VEC · Ø cable holder: 5 mm · Color: black · Total length: 77 mm · Ø Internal flywheel: 90 mm · Cable length: 140 mm · Cable length: 420 mm · Place of use: Internal (in the ignition) · Height: 48 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Hole spacing: 54 mm
EUR 113.50
Not in stock
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Manufacturer: MVT Allumage · Manufacturer: swiing · Area of application: Tuning · Tension: 12 V · Direction of rotation: left · Ø mounting plate: 96 mm · Ø Flywheel outside: 49.2 mm · Ø cable: 7 mm · Performance: 65 W · Mounting type: Screws · Number of fixing points: 2 pcs · Weight: 268 g
EUR 414.60
GPO ignition set CDI anticlockwise 12 V
Manufacturer: GPO · Material: Aluminum · Tension: 12 V · Performance: 17 W · Direction of rotation: left · Ø mounting plate: 90 mm · Ø Internal flywheel: 90 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Original · Area of application: Standard
EUR 240.60
GPO / swiing ignition set, left-hand breaker 6V
Manufacturer: GPO · Manufacturer: swiing · Material: Aluminum · Tension: 6 V · Performance: 17 W · Direction of rotation: left · Ø mounting plate: 90 mm · Ø Internal flywheel: 90 mm · Mounting type: Screws · Number of fixing points: 4 pcs · Area of application: Original · Area of application: Standard
EUR 227.10
Not in stock
Moped fans like you also bought:
Light coil 6V with cable
Ø Internal flywheel: 90 mm · Total length: 76.8 mm · Ø mounting hole: 4.1 mm · Tension: 6 V · Performance: 17 W · Hole spacing: 54 mm · Height: 25.2 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Original · Area of application: Standard
EUR 21.50
GPO flywheel 6V / 17W anticlockwise (Version 2.0) | Puch, Sachs, Belmondo
Manufacturer: GPO · Material: Steel · Tension: 6 V · Performance: 17 W · Direction of rotation: left · Weight: 900 g · Ø cone small inside: 11.5 mm · Ø cone large inside: 15 mm · Cone length: 18.5 mm · Cone ratio: 1:5 · Ø Internal flywheel: 91.1 mm · Ø Flywheel outside: 116.5 mm · Thread type: MF26x1.5 (fine pitch thread) · Thread length: 8 mm · Height: 36.1 mm · Pony OEM number: A2600 · Sachs OEM no.: 0286 175 005
EUR 99.90
Hot
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
Manufacturer: VEC · Ø cable holder: 5 mm · Color: black · Total length: 77 mm · Ø Internal flywheel: 90 mm · Cable length: 140 mm · Cable length: 420 mm · Place of use: Internal (in the ignition) · Height: 48 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø mounting hole: 4.6 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Hole spacing: 54 mm
EUR 113.50
Not in stock
Nut M10x1 SW14 Flywheel
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Nut type: Flange nut · Thread type: MF10x1 (fine pitch thread) · Drive: External hexagon · Ø outside: 18.8 mm · Height: 8.9 mm · Width across flats SW: 14 mm · Area of application: Standard · Pony OEM number: A4513 · Sachs OEM no.: 0942 072 102
EUR 2.75
Collection only possible with online purchase and appointment.
