Short version of the bolt for holding the support plate (brake anchor plate) made of stainless steel for your Puch Maxi S, N, S-2A / Supermaxi LG1, LG2 mopeds
Including M10x1 nut and matching washer.
Total length: 32 mm
Ø bolt: 9.8 mm
Thread: M10
The M10x1 nut and a matching washer for the stud are included in the scope of delivery.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Puch spare part number: 349.1.41.008.1
Details
| Manufacturer | GPO |
| Number of components | 3 pcs |
| Material | Chrome steel (known as Nirosta®) |
| Ø shaft | 9.8 mm |
| Shank length | 9.5 mm |
| Drive | Outer edge |
| Total length | 32 mm |
| Thread length | 13 mm |
| Ø External head | 14 mm |
| Shank | Yes |
| Area of application | Standard |
| Thread type | MF10x1 (fine pitch thread) |
| Width across flats SW | 13 mm, 17 mm |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) |
Accessories & related products
swiing® revival rear brake anchor plate | Puch Maxi S, X30 NG
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø axle: 12 mm · Ø External brake pads: 80 mm · Ø outside: 91 mm · Total length: 187 mm · Ø bore: 12.2 mm · Cranking (offset): 8 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 55 mm · Ø screw holder: 6.5 mm
EUR 79.40
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø axle: 12 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Ø outside: 92 mm · Cranking (offset): 10 mm · Brake lever length (lever length): 68 mm · Total length: 135 mm
EUR 85.10
Not in stock
Moped fans like you also bought:
swiing® revival 17" rear fender Inox | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: angular · Mounting type: Nuts & bolts · Total length over ends: 625 mm · Scope: 940 mm · Wide mudguard profile: 82 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 285 mm · Wheel size [inch]: 17 "
EUR 43.20
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.30
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø axle: 12 mm · Ø screw holder: 6.5 mm · Ø shaft: 10 mm · Wide cam holder: 12 mm · Ø outside: 92 mm · Cranking (offset): 10 mm · Brake lever length (lever length): 68 mm · Total length: 135 mm
EUR 85.10
Not in stock
Collection only possible with online purchase and appointment.
