Slotted Ø 135x16 mm brake pad with return spring for the rear drum brake on your Piaggio moped / moped.
Slotted brake pads enable improved heat and brake dust dissipation, resulting in an increased braking effect. This improved braking power is particularly suitable for daily use, especially with slightly increased performance.
The pad compound corresponds to the AKOA alternative sold on the market. The quality is okay and the brakes fulfill their purpose, but do not reach the level of the swiing® brake pads in terms of braking performance and durability.
Alternative brake pads with an even higher quality pad compound for racing, suitable springs and appropriate cleaning and lubricating agents can be found in the accessories section.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Original Piaggio spare part number: 414557
Details
| Slotted | Yes |
| Manufacturer | GPO |
| Springs included | No |
| Ø locating bolt | 8 mm |
| Width | 16 mm |
| Number of springs | 1 pcs |
| Ø drum | 135 mm |
| Area of application | Tuning |
| Piaggio OEM number | 414557 |
Suitable for the following models
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
swiing® ingenious rear brake shoe Ø 135 x 16 Racing slotted | Piaggio Ciao, SI, Bravo, Boxer
Slotted: Yes · Manufacturer: swiing® ingenious parts · Color: graphite colors · Color: gray · Springs included: No · Width: 16 mm · Ø locating bolt: 8 mm · Number of springs: 1 pcs · Ø drum: 135 mm · Area of application: Racing
EUR 21.50
Polini brake shoe "Racing" Ø 135 x 16 rear | Piaggio Ciao, SI, Bravo, Boxer
Slotted: No · Manufacturer: Polini · Color: blue · Ø drum: 135 mm · Springs included: No · Width: 16 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning · Alternative version of the Piaggio OEM number: 414557 · Alternative version of the Piaggio OEM number: 4145574
EUR 23.70
Moped fans like you also bought:
Hot 
swiing® ingenious bearing conversion kit cast front wheel | Piaggio Ciao, SI, Bravo, Grillo
Manufacturer: SKF · Manufacturer: swiing® ingenious parts · Material: Aluminum · Material: Steel · Width: 9 mm · Ø inside: 11.25 mm · Ø inside: 15 mm · Ø outside: 14.9 mm · Ø outside: 20 mm · Ø outside: 32 mm · Total length: 53.5 mm · Ball bearing closed: Yes
EUR 33.50
swiing® revival clamping screw front brake (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Number of components: 3 pcs · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Ø Cable bushing: 2.1 mm · Thread length: 9.5 mm · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Total length: 21 mm · Screw head: Hexagon · Ø shaft: 10.9 mm · Thread type: M7x1 (standard thread) · Alternative version of the Piaggio OEM number: 27348
EUR 6.15
swiing® revival clamping screw rear brake (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Number of components: 3 pcs · Material: Steel · Surface: galvanized (blue) · Ø Cable bushing: 2.1 mm · Thread length: 11 mm · Total length: 21.5 mm · Screw head: Hexagon · Thread type: M7x1 (standard thread) · Ø shaft: 10.5 mm · Drive: External hexagon · Width across flats SW: 11 mm · Width across flats SW: 14 mm · Alternative version of the Piaggio OEM number: 154533
EUR 6.60
Collection only possible with online purchase and appointment.
