Capacitor with lug and cable for screwing, suitable for old Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds with breaker ignition.
This capacitor with attached output cable for the ignition coil was fitted as standard on early models between 1967 and 1979. The motor housings can be recognized by the hinged earth connection. In addition, these motors have a 13 mm hole for the rubber plug.
- Mounting type: lug for screwing
- Ø mounting hole: 4.5 mm
- Ø outer: 18 mm
- Height: 27 mm
- Connection type: Cable for screwing
- Length output cable coil: 380 mm
- Capacitance: 0.28 µF (micro Farad - capacitance of the capacitor)
Further parts such as the capacitor felt can be found in the accessories section.
Original Piaggio spare part number: 114471
Branded product from the Italian manufacturer EFFE.
Details
| Manufacturer | EFFE |
| Capacity | 0.28 µF |
| Mounting type | Tab for screwing |
| Connection type | Cable for screwing |
| Height | 27 mm |
| Ø outside | 18 mm |
| Ø mounting hole | 4.5 mm |
| Area of application | Original |
| Piaggio OEM number | 114471 |
Suitable for the following models
| Piaggio | Ciao - P, SC Bravo / Super Bravo Boxer |
Accessories & related products
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Width across flats (trigger): 10 mm · Width across flats (trigger): 18 mm · Manufacturer: swiing® ingenious parts · Number of components: 2 pcs · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Diameter: 12 mm · Diameter: 24 mm · Total length: 100 mm · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Width across flats Screw: 19 mm · Area of application: (Dis)assembly tool
EUR 20.40
GPO breaker without cable (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Material: Steel · Area of application: Original · Area of application: Standard · Cable available: No · Ø axle: 5 mm · Number of fixing points: 1 pcs · Ø mounting hole: 5 mm · Piaggio OEM number: 103133
EUR 11.30
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Ø mounting hole: 4.4 mm · Mounting type: Tab for screwing · Ø outside: 18 mm · Height: 26 mm · Connection type: Cable for screwing · Area of application: Original · Area of application: Standard · Piaggio OEM number: 102939
EUR 13.50
Not so nice 
Flywheel breaker ignition incl. coils | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Quenching · Material: Aluminum · Material: Steel · Ø Internal flywheel: 92 mm · Tension: 6 V · Direction of rotation: right · Ø Flywheel outside: 141 mm · Area of application: Standard · Weight: 1300 g
EUR 113.50
swiing® revival screw set ignition galvanized | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Number of components: 14 pcs · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Drive: Cross recess · Drive: Slot · Screw head: Cylinder head · Screw head: Panhead
EUR 8.95
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spraying · Ø cable: 5 mm · Ø cable: 7 mm · Sachs OEM no.: 0265 100 00 · Pony OEM number: A2099
EUR 9.95
GPO blade gauge set 0.05 - 1.00 mm 13 pcs.
Measuring range [mm]: 0.05 - 1 mm · Manufacturer: GPO · Number of components: 13 pcs · Material: Metal · Surface: blank / oiled · Width: 13 mm · Thickness: 0.05 mm · Thickness: 0.15 mm · Thickness: 0.2 mm · Thickness: 0.25 mm · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 0.5 mm · Thickness: 0.6 mm · Thickness: 0.7 mm · Thickness: 0.8 mm · Thickness: 0.9 mm · Thickness: 1 mm · Total length: 105 mm · Area of application: Measuring tool
EUR 13.50
EFFE Condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: EFFE · Capacity: 0.26 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Height: 26 mm · Ø outside: 18 mm · Area of application: Original · Area of application: Standard · Ø mounting hole: 4.4 mm · Piaggio OEM number: 102939
EUR 13.50
swiing® ingenious puller flywheel | Piaggio Ciao, SI, Bravo, Boxer
Width across flats (trigger): 10 mm · Width across flats (trigger): 18 mm · Manufacturer: swiing® ingenious parts · Number of components: 2 pcs · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Diameter: 12 mm · Diameter: 24 mm · Total length: 100 mm · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Width across flats Screw: 19 mm · Area of application: (Dis)assembly tool
EUR 20.40
GPO breaker without cable (version 2.0) | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Material: Steel · Area of application: Original · Area of application: Standard · Cable available: No · Ø axle: 5 mm · Number of fixing points: 1 pcs · Ø mounting hole: 5 mm · Piaggio OEM number: 103133
EUR 11.30
GPO Pulse coil | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Ø Internal flywheel: 91 mm · Tension: 6 V · Width: 23.8 mm · Total length: 80 mm · Height: 23.8 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Area of application: Standard · Hole spacing: 50 mm · Ø mounting hole: 4.6 mm
EUR 28.10
Collection only possible with online purchase and appointment.
