swiing® ingenious EVO ignition

Thanks to a flywheel weighted as standard, it has a smoother idle than conventional racing ignitions. Thanks to its fine balancing, it keeps vibrations low even at high speeds. The stator was designed to withstand high heat loads so that no failures occur even at full power. Care has also been taken to ensure that the ignition is always easy to install and adjust. This makes it probably the most reliable racing ignition on the market.

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo · Kreidler · Zündapp

32719

swiing® ingenious EVO flywheel

Manufacturer: swiing® ingenious parts · Material: Steel · Direction of rotation: any · Weight: 390 g · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Cone length: 28 mm · Ø Internal flywheel: 63.5 mm · Cone ratio: 1:5 · Ø Flywheel outside: 75 mm · Thread type: MF26x1.5 (fine pitch thread) · Thread length: 9 mm · Height: 38 mm

EUR 102.20

Inox

For: Universal · Puch · Sachs · Zündapp Belmondo · Tomos

32737

swiing® ingenious 280 g additional weight EVO Inox

Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: electropolished · Weight: 280 g · Ø inside: 39 mm · Ø outside: 95 mm · Ø bolt circle: 48 mm · Ø bolt circle: 54 mm · Number of fixing points: 3 pcs · Ø mounting hole: 6.2 mm · Thickness: 12 mm · Area of application: Tuning

EUR 56.70

swiing® ingenious EVO ignition | Sachs 503 AB, AC, ADV

For: Sachs

36570

swiing® ingenious EVO ignition | Sachs 503 AB, AC, ADV

Manufacturer: swiing® ingenious parts · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: any · Ø mounting plate: 90 mm · Ø Internal flywheel: 63.5 mm · Ø Flywheel outside: 75 mm · Mounting type: Screws · Number of fixing points: 3 pcs · Area of application: High End · Area of application: Racing · Area of application: Tuning

EUR 284.00

For: Puch · Sachs · Zündapp Belmondo · Kreidler · Zündapp

32724

swiing® ingenious EVO stator

Ø inside: 28 mm · Ø outside: 94 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Tension: 12 V · Performance: 60 W · Number of cables: 4 pcs · Cable length: 620 mm · Cable length: 700 mm · Number of fixing points: 4 pcs · Ø bolt circle: 80 mm · Area of application: Tuning

EUR 124.90

Inox

For: Puch · Sachs · Zündapp Belmondo

32736

swiing® ingenious 100 g additional weight EVO Inox | Sachs 503 / Puch Velux / Zündapp Belmondo

Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: electropolished · Weight: 100 g · Ø inside: 75 mm · Ø outside: 120 mm · Ø bolt circle: 100 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Thickness: 2 mm · Area of application: Tuning

EUR 22.60

Inox

For: Puch · Sachs · Zündapp Belmondo

32738

swiing® ingenious 250 g additional weight EVO Inox | Sachs 503 / Puch Velux / Zündapp Belmondo

Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: electropolished · Weight: 250 g · Ø inside: 75 mm · Ø outside: 120 mm · Ø bolt circle: 100 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Thickness: 5 mm · Area of application: Tuning

EUR 29.30

For: Puch · Sachs · Zündapp Belmondo

32735

swiing® ingenious EVO ignition coil

Manufacturer: swiing® ingenious parts · Ø cable holder: 7 mm · Cable length: 480 mm · Color: black · Total length: 80 mm · Height: 50 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Ø mounting hole: 6.5 mm · Hole spacing: 62 mm · Area of application: Tuning

EUR 68.10

For: Universal · Puch · Sachs · Zündapp Belmondo

32734

swiing® ingenious EVO CDI Box

Manufacturer: swiing® ingenious parts · Material: Plastic · Color: black · Total length: 75 mm · Width: 42 mm · Height: 30 mm · Number of fixing points: 1 pcs · Ø mounting hole: 6.6 mm · Area of application: Tuning

EUR 102.20

Set

For: Tomos

33295

swiing® ingenious EVO ignition | Tomos

EUR 284.00

swiing® ingenious drive pinion cable starter EVO, HPI | Puch E50

For: Puch

24821

swiing® ingenious drive pinion cable starter EVO, HPI | Puch E50

Number of fixing points: 3 pcs · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Ignition system: HPI

EUR 47.60

Set

swiing® ingenious EVO ignition | Sachs 503 AAL, ABL, 2AL, 2 BL

For: Sachs

33511

swiing® ingenious EVO ignition | Sachs 503 AAL, ABL, 2AL, 2 BL

EUR 340.80

swiing® ingenious EVO ignition | Puch E50, Z50

For: Puch

33513

swiing® ingenious EVO ignition | Puch E50, Z50

EUR 284.00

Hot

swiing® ingenious degree disk moped | Bosch, Ducati, EVO, HPI, MVT, PVL, Selettra

Universal

18196

swiing® ingenious degree disk moped | Bosch, Ducati, EVO, HPI, MVT, PVL, Selettra

Manufacturer: swiing® ingenious parts · Area of application: Measuring tool · Material: Aluminum · Surface: anodized · Thickness: 1 mm

EUR 28.30

swiing® ingenious EVO ignition | Sachs 50/2, 50/3, 535, 505, 506

For: Sachs · Hercules

36545

swiing® ingenious EVO ignition | Sachs 50/2, 50/3, 535, 505, 506

EUR 284.00

Set

swiing® ingenious EVO ignition | Puch X30 Velux

For: Puch

33509

swiing® ingenious EVO ignition | Puch X30 Velux

EUR 340.80

Set

swiing® ingenious EVO ignition | Zündapp 247 Belmondo

For: Zündapp Belmondo

33510

swiing® ingenious EVO ignition | Zündapp 247 Belmondo

EUR 340.80

swiing® ingenious fan wheel black (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

For: Sachs

23463

swiing® ingenious fan wheel black (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø outside: 110 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Number of fixing points: 6 pcs · Height: 25 mm · Weight: 116 g · Alternative version of the Pony OEM number: A1026 · Alternative version of the Sachs OEM number: 0211 070 105

EUR 68.10

swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

For: Sachs

28497

swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø outside: 110 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Number of fixing points: 6 pcs · Height: 25 mm · Weight: 116 g · Alternative version of the Pony OEM number: A1026 · Alternative version of the Sachs OEM number: 0211 070 105

EUR 70.90

swiing® ingenious fan wheel chrome (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

For: Sachs

28496

swiing® ingenious fan wheel chrome (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: chrome-plated · Color: Chrome · Ø outside: 110 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Number of fixing points: 6 pcs · Height: 25 mm · Weight: 116 g · Alternative version of the Pony OEM number: A1026 · Alternative version of the Sachs OEM number: 0211 070 105

EUR 78.30

swiing® ingenious pull starter EVO & HPI ignition (210) | Puch E50

For: Puch

23580

swiing® ingenious pull starter EVO & HPI ignition (210) | Puch E50

Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black · Ignition system: HPI · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 137.5 mm · Height: 93 mm · Total length: 160 mm · Width: 135 mm

EUR 170.30

swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo

23464

swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

Ø inside: 39 mm · Ø outside: 120 mm · Height: 13.5 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Weight: 87 g

EUR 68.10

swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo

27576

swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Height: 13.5 mm · Weight: 87 g

EUR 70.90

swiing® ingenious fan wheel chrome (EVO, HPI, Bosch, Ducati) | Puch X30 Velux, Sachs 503, Belmondo

For: Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo

27577

swiing® ingenious fan wheel chrome (EVO, HPI, Bosch, Ducati) | Puch X30 Velux, Sachs 503, Belmondo

Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: chrome-plated · Color: Chrome · Ø outside: 120 mm · Ø inside: 39 mm · Ø mounting hole: 6 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Number of fixing points: 10 pcs · Height: 13.5 mm · Weight: 87 g

EUR 78.30

swiing® ingenious 215 g additional weight EVO, HPI | Sachs 502, 50/2, 50/3, 50/4

For: Sachs

30068

swiing® ingenious 215 g additional weight EVO, HPI | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Weight: 215 g · Number of fixing points: 3 pcs · Area of application: Performance

EUR 37.70

swiing® ingenious EVO racing ignition 12 V with light 60 W

For: Puch · Sachs · Zündapp Belmondo

31175

swiing® ingenious EVO racing ignition 12 V with light 60 W

Manufacturer: swiing® ingenious parts

EUR 284.00

swiing® ingenious EVO ignition | Sachs 502, 50/2, 50/3, 50/4

For: Sachs

33512

swiing® ingenious EVO ignition | Sachs 502, 50/2, 50/3, 50/4

EUR 340.80

swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra

For: Puch · Sachs · Zündapp Belmondo

28509

swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Weight: 110 g · Ø inside: 24.5 mm · Ø outside: 65 mm · Ø bolt circle: 50 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6 mm · Thickness: 9 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning

EUR 41.40

Inox

For: Puch · Piaggio

35791

swiing® ingenious pull-wire starter Coil spring Inox

Spring design: Special spring · Manufacturer: swiing® ingenious parts · Material: Spring steel

EUR 16.90

Inox

For: Universal · Puch · Sachs · Pony / Cilo (Beta 521 & 512) · Zündapp Belmondo

23780

swiing® ingenious 250 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo

Manufacturer: swiing® ingenious parts · Material: Chrome steel (stainless steel) · Surface: blank · Weight: 250 g · Ø inside: 71.8 mm · Ø outside: 117 mm · Ø bolt circle: 101 mm · Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Thickness: 5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning

EUR 29.30

swiing® ingenious thread protection bushing M12x1

Universal

32469

swiing® ingenious thread protection bushing M12x1

Diameter: 16 mm · Thread type: MF12x1 (fine pitch thread) · Width across flats (trigger): 13 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 14 mm · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Total length: 25 mm

EUR 12.40

Page 1 of 2

More collections

GPO «Pomodoro» Tuningzylinder

The sun-ripened ‘Pomodoro’ tuning cylinder for Sachs 503 engines is the alternative to comparable racing kits and impresses with its freshness in the lower rev range as well as its powerful bite in the form of acceleration and pulling power. It also impresses with a juicy finish in the upper rev range.

Custom 17’ cast rims for Grimeca hubs

23_10-mklt-collection-swiing-17-vergaser-01msc

swiing® ingenious 17 mm SRF carburettor

The new swiing 17 mm carburettor gives you a real boost with its original look. Perfectly camouflaged on the outside, top performance for your moped on the inside. Available with matching intake manifold for Puch E50 and Z50.

Grippy tyres by Vee Rubber

From everyday tyres to studded and full slick. Founded in 1977, the Thai tyre manufacturer Vee Rubber offers a wide range of stylish tyre designs for every surface with an excellent price-performance ratio.

Mofakultwear helmets

Helmets from Mofakultwear don't just look good, they should be good too. That's why they are handmade in Italy. Our models are all ECE-R22.05 approved and are absolutely roadworthy. So that you always have a good feeling when cruising.

Collection only possible with online purchase and appointment.