Special racing clutch for Puch Maxi mopeds / mopeds with E50 input kickstarter engine.
The difference between this racing clutch and the regular centrifugal clutches with swing arms is that the contact surface of the clutch linings is more than twice as large. As a result, the clutch grips much better.
In addition, the engine picks up more speed before the clutch engages.
The driver pinion and the nut for mounting the clutch are included in the scope of delivery.
Attention: Not suitable for certain Puch Maxi E50 engines.
Details
Number of jaws | 3 pcs |
Area of application | Tuning |
Suitable for the following models
Puch | E50 |
Accessories & related products
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Aluminum · Ø inside: 13.6 mm · Ø inside: 14.6 mm · Number of jaws: 3 pcs · Thickness: 20.3 mm · Ø outside: 93 mm · Recording type: Cone mounting · Number of springs: 3 pcs · Area of application: Racing
EUR 352.20
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Color: silver · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spraying · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 9.95
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Manufacturer: Airsal · Camouflaged: Yes · Material: Aluminum · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Nominal diameter: 44 mm · Ø cylinder neck: 48 mm · Ø piston pin (B): 12 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Hole spacing outlet: 42 mm · Decompressor: Yes · Outlet type: straight · Hole spacing inlet: 38 mm · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Area of application: Tuning
EUR 96.50
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Thickness: 3 mm · Reinforced: No · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Hole spacing outlet: 42.5 mm · Ø screw holder: 6.6 mm · Area of application: Tuning
EUR 8.40