Hot 
The triple clutch high-end clutch is originally from an SX-50 KTM motorcycle and was reworked by a Swiss high-end forge and made to fit E50 engines.
No adjustments necessary! The clutch can be fitted to E50 engines plug & play.
The clutch has been extensively tested in both cross-country and asphalt racing and guarantees constant engagement and disengagement over the entire race distance, even when the transmission is heated.
The special nut, which has an elongated shaft, additionally supports the crankshaft in the gearbox cover, thus significantly reducing the load on the crankshaft bearing on the clutch side.
The weights (centrifugal weights) built into the clutch push against the spring force at higher engine speeds, thus engaging the multi-plate clutch. When the speed drops again, the plates are relieved and the clutch goes into neutral.
The clutch hardness is set to 5.7 mm as standard. The clutch can be individually adjusted by tightening or loosening the screws. The screws can be adjusted using the inlet screw in the clutch cover without having to remove the clutch cover.
Number of teeth in clutch basket: 18
Toothing type: Straight-toothed
Included in delivery:
- Complete clutch pack with carbon linings
- Special nut with shaft journal
- Clutch basket incl. racing sliders
- Special nut with shaft journal
- Special nut with shaft journal
- Special nut with shaft journal
- Special nut with shaft journal. Racing sliding bushes
- Clutch puller plate
- Clutch cover with integrated, 2-row spherical roller bearing from the quality brand SKF
The clutch should be fitted with 4.5 dl GB 6 gearbox, you will find this as well as other suitable parts in the accessories section.
A quality product manufactured in Switzerland.
Details
| Manufacturer | Made in Switzerland |
| Area of application | Tuning, Racing, Cross, High End |
Suitable for the following models
| Puch | E50 |
Accessories & related products
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Number of components: 1 pcs · Ø outside: 116 mm · Ø inside: 106 mm · Thickness: 0.35 mm · Number of fixing points: 4 pcs · Color: sand-colored · Puch OEM number: 349.1.10.349.1
EUR 2.75
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Thickness: 0.5 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.30
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Thickness: 1 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.45
Moped fans like you also bought:
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Drive: External hexagon · Drive: Slot · Manufacturer: swiing® revival parts · Width across flats Screw: 13 mm · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Thread length: 12 mm · Total length: 18 mm · Puch OEM number: 901.1053
EUR 4.00
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Gearbox type: Foot control · Gearbox type: Manual gearshift · Contents [ml]: 450 ml · Area of application: Gearbox lubrication with clutch
EUR 11.30
EUR 25.11/l
swiing® ingenious intake manifold Gilardoni italkit Inox
Ø inside: 21 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: No · Ø External connection: 24 mm · Mounting type: Screws · Hole pattern [mm]: 60 x 35 · Number of fixing points: 4 pcs · Total height: 55 mm · Area of application: Tuning · Height flange center hole: 42.5 mm · Total length: 80 mm
EUR 77.20
DMP 45 mm cylinder kit incl. diaphragm | Puch
Manufacturer: DMP · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 70 ccm · Nominal diameter: 45 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Area of application: Tuning · Thread outlet: M6x1 (standard thread)
EUR 181.70
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black-matt · Ignition system: MVT Allumage · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Height: 82 mm · Total length: 170 mm · Width: 150 mm
EUR 170.30
Not in stock
Rito crankshaft full cheeks with mounted bearings | Puch E50
Manufacturer: Rito · Material: Steel · Cheek type: Full cheeks · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Total length of crankpin on clutch side: 74 mm · Thread type: MF10x1 (fine pitch thread) · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 10 mm · Dimension needle bearing: 12 / 15 x 14.2 (axe 12) · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.6 mm · Area of application: High End
EUR 227.10
Collection only possible with online purchase and appointment.
