Carburetor cover for Bing SSB & SSE carburetors.
Installed on Sachs 502, 50/2, 50/3, 50/4, Puch MV / MS and ILO/JLO mopeds.
With M6 thread to accommodate the adjusting screw.
Details
Material | Aluminum |
Component group Carburetor | Adjusting screws, float, etc. |
Carburetor type | SSB, SSE |
Thread type | M6x1 (standard thread) |
Suitable for the following models
Puch | 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
ILO / JLO |
Accessories & related products
BING rubber grommet Ø 8 mm carburetor pipe bend
Manufacturer: BING · Material: Rubber · Ø inside: 8 mm · Ø outside: 12 mm · Clamping diameter: 4 mm · Total length: 29 mm · Color: black · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
EUR 4.40
Moped fans like you also bought:
Karcoma fuel tap M12x1 vertical (with union nut) 2 connections
Manufacturer: Karcoma · Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Mounting type: Union nut · Ø fuel hose connection: 6 mm · Installation direction: vertical / vertical · Outlet direction: any · Spare tube shape: straight · Reserve level: 50 mm
EUR 25.80
GPO license plate holder Inox
Width: 105 mm · Manufacturer: GPO · Material: Chrome steel (known as Nirosta®) · Thread type: M5x0.8 (standard thread) · Color: silver · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 30 mm · Hole spacing: 50 mm · Height: 5.3 mm · Total length: 145 mm · Thread length: 8 mm · Ø mounting hole: 5 mm
EUR 12.30
Wippermann drive chain No.18 (double reinforced)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: Wippermann · Material: Steel · Surface: blank / oiled · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Color: gray · Ø bore: 4.2 mm · Ø Pin: 4.15 mm
EUR 38.20
swiing® revival seal Float SRE, SRC, SRF, SRA
Thickness: 1.5 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Surface: blank · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø inside: 41 mm · Ø outside: 45 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.15
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Angle: 85 ° · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Internal thread: MF6x0.75 (fine pitch thread) · Height: 30 mm · Total length: 45.5 mm · Total length: 53.5 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 6.65
GPO 70° carburetor pipe bend M6x0.75
Manufacturer: GPO · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Angle: 70 ° · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: M5x0.8 (standard thread) · Total length: 35 mm · Total length: 41.5 mm · Height: 36 mm · Height: 37 mm · Width across flats nut: 8 mm
EUR 5.50
End piece for inner cable aluminum copper (per piece)
Cable cross-section: 1.2 - 2.1 mm · Number of connections: 1 pcs · Color: copper-colored · Ø inside: 2.3 mm · Ø outside: 2.9 - 4.1 mm · Total length: 12 mm · Number of components: 1 pcs · Material: Aluminum · Surface: anodized · Area of application: Workshop accessories
EUR 0.55
swiing® revival gasket 0.4 mm gearbox cover | Sachs 502, 50/2, 50/3, 50/4 (A1827)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Total length: 210 mm · Width: 130 mm · Thickness: 0.4 mm · Number of fixing points: 5 pcs · Pony OEM number: A1827 · Sachs OEM no.: 0250 087 100
EUR 6.65