44 mm oversize piston with two 1 mm rectangular piston rings with internal locking (IS) for the Metra-Kit cylinder on your Puch moped / moped.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their positions and locking types on the legend in the images.
The piston kit contains piston pins, piston clips and piston rings.
You will find the corresponding assembly tool, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Quality product from the Spanish manufacturer Barikit.
Details
| Manufacturer | Barikite |
| Nominal diameter | 44 mm |
| Ø outside piston (A) | 44 mm |
| Ø piston pin (B) | 12 mm |
| Compression height (C) | 22.3 mm |
| Curvature (D) | 3.35 mm |
| Total piston height (E) | 52.2 mm |
| Number of piston rings (F) | 2 pcs |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Internal fuse (IS) |
| Piston ring height | 1 mm |
| Piston weight | 100 g |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Metrakit piston 43.5 mm | Puch
Manufacturer: Metracite · Ø outside piston (A): 43.45 mm · Compression height (C): 22.9 mm · Curvature (D): 3.1 mm · Total piston height (E): 49.5 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 43.5 mm · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Piston ring height: 2 mm · Ø piston pin (B): 12 mm · Piston weight: 85 g
EUR 45.30
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Number of components: 7 pcs · Material: Steel · Surface: burnished · Area of application: (Dis)assembly tool · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
EUR 22.60
Metrakit 43.5 mm cylinder kit (65 cc - camouflaged) | Puch
Manufacturer: Barikite · Manufacturer: Metracite · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Camouflaged: Yes · Nominal diameter: 43.5 mm · Hole spacing inlet: 38 mm · Area of application: Tuning · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44
EUR 153.30
Moped fans like you also bought:
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Length spring hook: 50 mm · Leg length: 45 mm · Material: Spring steel · Surface: galvanized (blue) · Ø wire: 2.4 mm · Total length: 125 mm · Ø outside: 30 mm · Ø inside: 25.5 mm · Area of application: Original · Area of application: Standard
EUR 5.55
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Area of application: Standard
EUR 2.75
Continental 2.00 - 2.50 x 17" tube
Valve type: TR6 car valve · Manufacturer: Continental · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Wheel size [inch]: 17 " · Tire height [%]: 100 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5
EUR 16.90
Motorex High Pressure Grease 3000 850 g
Manufacturer: Motorex · Contents [g]: 850 g · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): -30 - 150 °C · Area of application: Chemistry · Area of application: Fat
EUR 22.60
EUR 26.59/kg
GPO stud bolt special M6x106 mm galvanized (10.9 strength) | Puch
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Diameter: 7 mm · Thread length: 15 mm · Thread length: 19 mm · Total length: 106 mm · Thread type: M6x1 (standard thread) · Strength class: 10.9 · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 4.90
Collection only possible with online purchase and appointment.
