41 mm racing cylinder with 55 cc, suitable for Sachs mopeds / mopeds with 503 2AL, AAL, 2BL, ABL CH engines.
Thanks to the additional holes for the cylinder head bolts as well as the two mounts for the blower cover, the cylinder can also be fitted to the Sachs 50/2 and 502 models, in which case the intake and exhaust accessories must be made by yourself.
The large displacement and the huge intake ensure plenty of torque.
The cylinder can be used on both Sachs 50/2 and Sachs 503 mopeds with the original cylinder head, but it should be noted that the pinch point at the narrowest point should be at least 1.5 mm. To ensure optimum operation and thus tease the maximum power out of the cylinder, we recommend using the 41 mm cylinder head from the accessories.
We also recommend using reinforced clutch springs so that the entire engine power can be transferred to the rear wheel. You can find these in the accessories section.
The BADASS 17 mm or 15 mm intake manifold is a perfect match for the cylinder and can be used with either a 15 mm Bing SRE or a 17 mm carburettor.
You can find the intake manifolds, as well as carburetors, in the accessories section.
Details:
- Cast iron reproduction cylinder with Ø 41.0 mm bore
- slot-controlled
- Ø 19 mm intake
- optimized Öoverflow channels
- improved timing
- no spindling of the engine housing necessary (Ø cylinder neck 45.0 mm)
- Ø external exhaust manifold connection: 26 mm
- incl. Ø 41 mm piston from the Italian manufacturer -GOL-
Differences to the GPO Pomodoro – replica cylinder:
- The BADASS 15 mm & 17 mm intake manifolds fit perfectly on the cylinder
- It is not possible to fit original or swiing® intake manifolds
- Thanks to the holes for the cylinder head and the blower cover, there is the possibility to mount the BADASS 15 mm & 17 mm intake manifold;the possibility of adapting the cylinder to a 50/2 or 502 engine
- Lower intake timing compared to the GPO Pomodoro
Installation instructions in German and the matching piston are included in the scope of delivery.
Attention: It is essential to replace the rubber silencers on 503 BL engines with aluminum silencers due to the increased performance in order to avoid fatigue fracture of the exhaust flange.
The aluminum silentblocs, matching gaskets, reinforced clutch springs and other add-on parts such as intake manifolds, carburettors, exhausts, etc. can be found in the accessories section.
Made by the BADASS brand.
The set includes the following fixed parts:
Hole pattern [mm]: 59 x 40 · Manufacturer: BAD ASS · Material: Gray cast iron · Surface: sandblasted · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Nominal diameter: 41 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 26 mm · Ø outlet inside: 23 mm · Ø Inlet inside: 19 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Camouflaged: No · Area of application: Tuning
Details
| Manufacturer | BAD ASS |
| Material | Gray cast iron |
| Camouflaged | No |
| Surface | sandblasted |
| Displacement | 55 ccm |
| Nominal diameter | 41 mm |
| Crankshaft stroke | 42 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 45 mm |
| Ø Outlet outside | 26 mm |
| Ø Inlet inside | 19 mm |
| Hole spacing inlet | 32 mm |
| Ø outlet inside | 23 mm |
| Thread inlet | M6x1 (standard thread) |
| Number of fixing points | 4 pcs |
| Area of application | Tuning |
| Outlet type | clamped |
| Hole pattern [mm] | 40 x 60 / 37 x 37 |
Suitable for the following models
| Sachs | 503 - AAL, ABL, 2AL / 2BL |
Accessories & related products
17 mm Bing SRF carburetor (replica)
Nominal diameter: 17 mm · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Width: 64 mm · Carburetor type: SRF · Height: 117 mm · Total length: 78 mm · Mounting type: Plug connection clamped · Ø fuel hose connection: 6 mm · Ø Internal connection: 23 mm · Ø Air filter connection: 60 mm · Ø Air filter connection: 64 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M4x0.7 (standard thread) · Nozzle block: 2.xx · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 73.80
swiing nozzle set M3.5 (58 - 68) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Drive: Slot · Quantity: 6 pcs · Nozzle type: Main nozzle · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68
EUR 18.10
swiing® ingenious 15mm tuning set carburetor HG short | Sachs 503
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Mounting type: Flange · Mounting type: Plug connection clamped · Hole spacing inlet: 32 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 181.70
Not in stock
swiing® ingenious 15 mm carburetor tuning camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Width: 50 mm · Carburetor type: SRE · Nominal diameter: 15 mm · Total length: 66 mm · Ø Internal connection: 20 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Area of application: Tuning · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 90.80
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Color: black · Width: 68 mm · Height: 52 mm · Filter type: Racing screen · Total length: 165 mm · Area of application: Tuning · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped
EUR 68.10
swiing® revival cylinder base gasket 0.3 mm | Sachs 503
Manufacturer: swiing® revival parts · Material: Oiled paper · Place of use: Cylinder base · Thickness: 0.3 mm · Nominal diameter: 45 mm · Ø inside: 45 mm · Ø cylinder: 38 - 40 mm · Hole pattern [mm]: 60 x 40 · Area of application: Standard
EUR 3.85
Not in stock
swiing resonance exhaust set Ø 28 / 70 mm | Sachs 503
Manufacturer: swiing · Material: Steel · Surface: chrome-plated · Ø outside: 70 mm · Total length: 730 mm · Color: Chrome · Ø Internal connection: 28 mm · Exhaust type: Cigar · Mounting type: Screwed clamp · Flame tube attachment: Plug connection clamped
EUR 159.00
swiing® revival silent blocks Alu Racing | Sachs 503 / 504 / 505 / 535
Ø inside: 8.3 mm · Ø outside: 21.95 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Surface: anodized · Nominal diameter inside: 8.5 mm · Total length: 13 mm · Ø Bundle: 26 mm · Alternative version of the Pony OEM number: A4286 · Alternative version of the Sachs OEM number: 0251 121 000
EUR 27.20
GPO piston 40.94 mm | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: GPO · Ø outside piston (A): 40.94 mm · Compression height (C): 28 mm · Curvature (D): 3.2 mm · Total piston height (E): 49.4 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.8 mm · Ø piston pin (B): 12 mm · Piston weight: 86 g
EUR 45.30
Hot 
BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL
Total length: 54 mm · Total height: 56.5 mm · Manufacturer: BAD ASS · Material: Aluminum · Area of application: Tuning · Thread type: M6x1 (standard thread) · Ø inside: 17 mm · Number of fixing points: 3 pcs · Camouflaged: No · Ø External connection: 23 mm · Mounting type: Screws · Height flange center hole: 45 mm · Hole spacing inlet: 32 mm
EUR 85.10
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Sachs 503, Puch Velux
Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: SRF · Nominal diameter: 17 mm · Ø Internal connection: 23 mm · Ø Inside entrance: 17 mm · Ø Output inside: 17.1 mm · Ø Air filter connection: 23 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m · Total length: 61.5 mm · Width: 47 mm · Height: 89 mm · Height: 112 mm · Area of application: Tuning
EUR 136.30
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Manufacturer: BAD ASS · Material: Aluminum · Camouflaged: No · Ø inside: 17.8 mm · Number of fixing points: 2 pcs · Area of application: Tuning · Ø External connection: 20 mm · Total length: 65 mm · Hole spacing inlet: 32 mm · Mounting type: Stud bolt · Total height: 55 mm · Height flange center hole: 45 mm
EUR 85.10
GPO cylinder gasket set BAD ASS Pandora 41 & 43 mm | Sachs 503, 50/2, 502
Manufacturer: GPO · Number of components: 2 pcs · Material: Oiled paper · Ø cylinder: 41 mm · Ø cylinder: 43 mm · Area of application: Tuning · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Thickness: 0.3 mm · Thickness: 1 mm · Hole spacing inlet: 32 mm
EUR 16.40
Not in stock
Moped fans like you also bought:
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing cage: Brass cage ball-guided · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Material: Steel · Surface: blank · Bearing type: Shoulder bearing · Width: 10 mm · Stock number: BO15 · Ø outside: 40 mm · Ø inside: 15 mm · Area of application: Standard · Ball bearing closed: No · Sachs OEM no.: 0932 007 001 · Pony OEM number: A4502
EUR 28.30
swiing® ingenious 15 mm carburetor tuning camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Width: 50 mm · Carburetor type: SRE · Nominal diameter: 15 mm · Total length: 66 mm · Ø Internal connection: 20 mm · Height: 95 mm · Ø Inside entrance: 15 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Area of application: Tuning · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 90.80
Large gasket set with shaft seals Engine | Sachs 503
Number of components: 14 pcs · Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Hole spacing inlet: 32 mm · Ø outlet inside: 13.3 mm · Hole pattern [mm]: 60 x 40
EUR 45.30
Hot
BAD ASS intake manifold 17 mm SRF short version | Sachs 503 2AL, 2BL
Total length: 54 mm · Total height: 56.5 mm · Manufacturer: BAD ASS · Material: Aluminum · Area of application: Tuning · Thread type: M6x1 (standard thread) · Ø inside: 17 mm · Number of fixing points: 3 pcs · Camouflaged: No · Ø External connection: 23 mm · Mounting type: Screws · Height flange center hole: 45 mm · Hole spacing inlet: 32 mm
EUR 85.10
BAD ASS 17 mm intake manifold (short) Bing SRE | Sachs 503 2AL/2BL
Manufacturer: BAD ASS · Material: Aluminum · Camouflaged: No · Ø inside: 17.8 mm · Number of fixing points: 2 pcs · Area of application: Tuning · Ø External connection: 20 mm · Total length: 65 mm · Hole spacing inlet: 32 mm · Mounting type: Stud bolt · Total height: 55 mm · Height flange center hole: 45 mm
EUR 85.10
GPO cylinder gasket set BAD ASS Pandora 41 & 43 mm | Sachs 503, 50/2, 502
Manufacturer: GPO · Number of components: 2 pcs · Material: Oiled paper · Ø cylinder: 41 mm · Ø cylinder: 43 mm · Area of application: Tuning · Hole pattern [mm]: 60 x 40 mm / 37 x 37 mm · Thickness: 0.3 mm · Thickness: 1 mm · Hole spacing inlet: 32 mm
EUR 16.40
Not in stock
Collection only possible with online purchase and appointment.
