45 mm special piston with a 0.96 mm rectangular piston ring with internal fuse (IS) for various Puch mopeds / mopeds.
The detailed dimensions of the piston according to the technical drawing can be found in the details. You can also find out about the relevant piston rings, their stems and locking types on the legend in the pictures.
The piston kit contains piston pin, piston clips and piston ring.
The piston can only be used in combination with a machined cylinder head, as it is 3 mm shorter at the top. The sides of the racing piston are Teflon-coated, but this alone does not increase performance. The Teflon coating wears off during operation, but this does not damage the cylinder in any way.
Only for good, skilled mechanics / tuners.
You will find the appropriate assembly tools, piston pin locks and, if necessary, the corresponding cylinder in the accessories section.
Quality product from the Italian manufacturer Athena.
Details
| Nominal diameter | 47 mm |
| Manufacturer | Athena |
| Surface | Teflon-coated |
| Ø outside piston (A) | 44.96 mm |
| Compression height (C) | 21.95 mm |
| Curvature (D) | 3.97 mm |
| Total piston height (E) | 49.6 mm |
| Number of piston rings (F) | 1 pcs |
| Piston ring mold | Rectangular ring |
| Piston ring impact | Internal fuse (IS) |
| Piston ring height | 0.96 mm |
| Ø piston pin (B) | 12 mm |
| Piston weight | 90 g |
Suitable for the following models
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Surface: burnished · Number of components: 7 pcs · Total length: 130 mm · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Width across flats SW: 10 mm · Width across flats SW: 17 mm
EUR 22.40
Moped fans like you also bought:
ESJOT sprocket 45 teeth 4-hole coaster black
Manufacturer: ESJOT · Material: Steel · Surface: powder-coated · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 45 pcs · Ø bolt circle: 105 mm · Ø inside: 94 mm · Ø mounting hole: 6.4 mm · Thickness: 4.5 mm · Hole spacing: 74 mm · Number of fixing points: 4 pcs · Color: black
EUR 67.40
swiing® ingenious clutch springs reinforced (+20%) (Version 2.0) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: blue · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Number of components: 3 pcs
EUR 20.20
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Strength class: 8.8 · Number of components: 1 pcs
EUR 11.20
Side stand black | Puch Maxi S, N, P1 / Supermaxi LG1, LG2 / X30 NS, NL, NG, N-2AH
Manufacturer: Made in Portugal · Material: Steel · Surface: powder-coated · Adjustable: Yes · Length pivot point - floor: 220 mm · Color: black · Mounting type: Screwed clamp · Number of fixing points: 2 pcs · Total length: 340 mm
EUR 22.40
Athena piston 45 mm #A | Puch
Manufacturer: Athena · Nominal diameter: 45 mm · Ø outside piston (A): 44.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.4 mm · Curvature (D): 3.15 mm · Total piston height (E): 52.67 mm · Number of piston rings (F): 1 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Tolerance group: A · Piston weight: 98 g
EUR 56.00
Athena 45 mm cylinder kit incl. diaphragm AJH | Puch
Nominal diameter: 45 mm · Manufacturer: Athena · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 47.8 mm · Ø Inlet inside: 16 mm · Number of fixing points: 4 pcs · Inlet window: 38 x 25 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 26 mm · Hole pattern [mm]: 44 x 44 · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 40 mm · Hole spacing inlet: 60 mm · Thread outlet: M6x1 (standard thread) · Decompressor: No · Camouflaged: No
EUR 332.00
Not in stock
Collection only possible with online purchase and appointment.
