High-quality clutch basket with spur gear suitable for your Puch moped / moped with E50 3- and 4-bearing engine and KTM SX50 clutch
.This set contains CNC-machined parts made of hardened steel, which have been specially designed for high loads. The straight-toothed gear wheel made of special steel impresses thanks to the finely ground teeth for optimum running smoothness and very low wear.
The small gear wheel attached to the clutch basket is firmly welded to the clutch basket and thus offers the optimum conditions for both an original setup and a tuning setup.
Details
| Manufacturer | ASP |
| Material | Steel |
| Surface | hardened & ground |
| Toothing type | straight toothed |
| Number of teeth | 19 pcs, 94 pcs |
| Area of application | Tuning, Racing |
Suitable for the following models
| Puch | E50 |
Accessories & related products
MBR Clutch KTM SX50 | Puch E50
Manufacturer: MBR · Material: Steel · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 386.20
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated · Ø Cable bushing: 1.6 mm · Thread length: 4 mm · Total length: 6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Drive: Slot · Ø outside: 5 mm
EUR 2.25
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Manufacturer: swiing® revival parts · Material: Nylon · Surface: blank · Color: black · Bearing type: Plain bearing · Total length: 19 mm · Ø outside: 20.2 mm · Ø inside: 16.2 mm · Ø Bundle: 24.1 mm · Puch OEM number: 349.1.42.005.1
EUR 2.85
Magura set screw M5x34 mm
Slotted: No · Ø Receptacle: 7.05 mm · Manufacturer: Magura · Width across flats nut: 8 mm · Width across flats Screw: 8 mm · Material: Brass · Surface: nickel-plated · Ø cable holder: 2.55 mm · Thread length: 24 mm · Total length: 34 mm · Thread type: M5x0.8 (standard thread)
EUR 2.85
swiing® revival screw M7x35 clamping bridge | Puch
Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Thread length: 34.6 mm · Total length: 41.6 mm · Screw head: Cylinder head · Thread type: M7x1 (standard thread) · Drive: Hexagon socket · Ø External head: 10.5 mm · Shank: No · Area of application: Standard · Width across flats SW: 5 mm · Strength class: 8.8
EUR 3.30
NGK CR6 Racing ignition cable & plug High End red
Manufacturer: NGK · Material: Rubber · Color: red · Cable length: 1000 mm · Cable available: Yes · Suppressed: Yes · Resistance: 5000 Ω · Component group Carburetor: Carburetor complete · Component group Carburetor: Spraying · Ø cable: 7 mm
EUR 45.30
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Thread length: 13 mm · Thread length: 18.5 mm · Total length: 106 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Width across flats SW: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.40
Hot 
Leonelli 12V voltage regulator (1A quality)
Manufacturer: Leonelli · Material: Aluminum · Material: Plastic · Tension: 12 V · Width: 27 mm · Performance: 100 W · Type of current: Alternating current (AC) · Total length: 50 mm · Height: 15 mm · Mounting type: Screws · Ø mounting hole: 6 mm
EUR 39.70
GPO piston stopper M14x1.25
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Diameter: 12 mm · Diameter: 16 mm · Thread type: MF14x1.25 (fine pitch thread) · Width across flats SW: 17 mm · Total length: 83 mm · Number of components: 1 pcs · Area of application: Special tool
EUR 10.80
Collection only possible with online purchase and appointment.
